View topic - WD5000AAKS-40TMA0 problem, need help

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

WD5000AAKS-40TMA0 problem, need help

Page 1 of 1

[ 2 posts ]

Previous topic | Next topic

Author

Message

raf-pl

Post subject: WD5000AAKS-40TMA0 problem, need help

Posted: July 10th, 2008, 11:27

Joined: October 30th, 2006, 10:41
Posts: 48
Location: Poland

Dears,

I have WD5000AAKS-40TMA0 drive with the following problem.
After power on, it starts to spin platters, and after it, it knocks about 10 times.
Then the platters are stopped. PC3000 detects it with all empty fields (model, firmware etc).
Registers DRD and DSC are on.
I am wondering what causes the problem: PCB, HEADS, ROM?

I would be very appreciated for any help.

Regards,
Rafal

Top

beto

Post subject: Re: WD5000AAKS-40TMA0 problem, need help

Posted: July 10th, 2008, 14:55

Joined: October 21st, 2005, 0:45
Posts: 1517
Location: Mexico

Tried to disabled all heads and tried to enabled head 0 or head 1 and check if reach DRDY DSC, without knocking

Best regards

Top

Page 1 of 1

[ 2 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 62 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum