EMTEC 1GB

[laptokowiec]

I've got flash drive that has partially damaged PCB (close to USB plug). I don't know model name of it.
I'm looking for PCB photo (both sides) of this drive.
I've seen somewhere similar one, but 2GB. It was C150B model.

[arvika]

Put your photo. What controller?

[drc]

Yeah, if you post a photo of what you have, that would help

[laptokowiec]

Controller UT163. Someone bend it and then tried to repair it.
Don't know where to connect second and third pin (USB plug to pcb).

Attachments

[arvika]

Looks like all element on place. Is pen recognize by OS?
If not, you should read flash directly form nand.

[fzabkar]

Controller UT163. Someone bend it and then tried to repair it.
Don't know where to connect second and third pin (USB plug to pcb).

Here is a datasheet for the controller:
http://booroo.ru/wp-content/uploads/files/UT163.pdf

It looks like pins 8 and 9 are the USB D+ and D- pins, respectively.

[laptokowiec]

It's not recognized by OS nor ChipGenius, but the led on it is on (red).
8 and 9. Thanks. I thought so. I'll try and let you know.

[laptokowiec]

Drive is working. Thanks.