TLGA BGA And VBGA ChipOn -> Flash-Extractor Reader ?

[Amarbir[CDR-Labs]]

Hello,
I wanted to ask the guys who have it .Do you need to reball The TLGA , BGA And VBGA Chips After You Remove From Defective Media Or these Adapters Read These Chips Without The Balls .If They Read Properly Only With The Balls That Means a Additional Step in Prep of Case .

[arvika]

No need.

[Amarbir[CDR-Labs]]

No need.

Hi,
Thank You For Confirming Me This ,This Video Prompted Me to ask This Question -> https://www.youtube.com/watch?v=EjzG6HDh08E .

PS : Jermy If you are seeing this i have left a few comments in some of the videos you made ,Can you reply to them .

[Blizzard]

Hi Amarbir, reball is just needed if you move NAND to a donor device. As you know, you can not always get 100% by reading chip and reconstructing. We typically read/reconstruct data after removal, if it's not perfect then we check to see if we have a matching donor. If we have one then we reball and read 100%.

[Amarbir[CDR-Labs]]

Hi Amarbir, reball is just needed if you move NAND to a donor device. As you know, you can not always get 100% by reading chip and reconstructing. We typically read/reconstruct data after removal, if it's not perfect then we check to see if we have a matching donor. If we have one then we reball and read 100%.

Thanks David ,
I would be placing order for my next second tool after pc3k flash tool first week jan 2018 "Softcenter "