Switch to full style
CompactFlash, SD, MMC, USB flash storage. Anything that does not have moving parts inside.
Post a reply

Re: MZ-VLB2560 NVME Question-Water Damage

September 25th, 2020, 3:17

What controller? Due to encryption operation maybe not finish with success.

Re: MZ-VLB2560 NVME Question-Water Damage

September 25th, 2020, 9:22

those controllers encrypt the data

ENCRYPTION SUPPORT
AES 256-bit Encryption (Class 0), TCG/Opal, IEEE1667 (Encrypted drive)

Re: MZ-VLB2560 NVME Question-Water Damage

September 26th, 2020, 0:46

Better fix the drive, if controller is still alive.

Re: MZ-VLB2560 NVME Question-Water Damage

September 26th, 2020, 4:11

frago wrote:Controller
Samsung
S4LR020
S82BKS4

This controller does not store encryption keys, and it is better to transfer nands

Re: MZ-VLB2560 NVME Question-Water Damage

September 28th, 2020, 20:29

while you have the NANDs off, prudent to dump each chip and store dumps somewhere. At least it may be a possible avenue to recovery after you kill the drive

Re: MZ-VLB2560 NVME Question-Water Damage

September 29th, 2020, 4:17

frago wrote:
gold6565 wrote:
frago wrote:Controller
Samsung
S4LR020
S82BKS4

This controller does not store encryption keys, and it is better to transfer nands


So my friend i will order a new nvme ,the same model like this and i will move the nands from the patient nvme to the new one right???


Yes, if the nandas are not damaged by water. This one I made yesterday, the information is in place.
Attachments
gold29.09.png

Re: MZ-VLB2560 NVME Question-Water Damage

October 3rd, 2020, 11:05

It was a good idea to check that first, glad it worked out too.
Post a reply