Apacer Panther AS350 512GB, 2.5" / SATA 6Gb/s

[mhp666]

I have an Apacer Panther AS350 512GB, 2.5" / SATA 6Gb/s, which is busy and I use MRTLAB 2.1.9.3 as a tool.
Does anyone know if this unit can be made with MRTLAB?

[Lardman]

It looks to supper the controller https://us.mrtlab.com/SSDDE/314.html

PC3000 ssd has support.

[mhp666]

Thanks for the reply.
With MRTLAB I get the following results:

Code:

Selected family : ............................: Silicon Power Slim S55 (SM2258XT)
Master Controller model : ....................: SM2258XT
Chip id : ....................................: 0xEC119B3F8ECB
Vendor : .....................................: Samsung

SSD state:
Wether it is in a ready state : ..............: Yes
Firmware working mode : ......................: ROM
SSD error code : .............................: 0x00(No error)
Whether SSD is locked  : .....................: No
Whether in safe mode : .......................: Yes
Whether access user area : ...................: No
Whether access SA  : .........................: No

Load loader...
Default Loader name : ........................: S0212B0 SSV3_00
Write default Loader : .......................: success
Load default Loader code : ...................: success
Obtain Loader version from firmware : ........:

Read Loader : ................................: success
Loader name : ................................: S0212B0 SSV3_00
Write to Loader : ............................: success
Execute Loader code : ........................: success

SSD state:
Wether it is in a ready state : ..............: Yes
Firmware working mode : ......................: LDR
SSD error code : .............................: 0x00(No error)
Whether SSD is locked  : .....................: No
Whether in safe mode : .......................: No
Whether access user area : ...................: No
Whether access SA  : .........................: Yes
Load loader : ................................: success

Basic SSD information:
Read chip information : ......................: success
Chip id : ....................................: 0xEC119B3F8ECB
Vendor : .....................................: Samsung
Flash type : .................................: 3dv4-64L QLC 32k
Chip capacity : ..............................: 34224 Mb
channel number : .............................: 2
Chip number per channel : ....................: 1
Chip layers : ................................: 2
Number of logical units : ....................: 1
Number of chip storage blocks : ..............: 0x592
Number of pages per storage block : ..........: 0x600
Page size : ..................................: 0x4000
Maximum retry level : ........................: 0x0

Load relocation block table : ................: Fail


Load CP list......
CP list data is not found in HDD, use the default CP list!


Load CP list... : ............................: success

Read password information...
Read password information : ..................: Fail

[saltwater]

Without relocation block table, and correct CP list, how can you create translator?

I think not at all

I have a same case, and after load loader, i have a same result.

[mhp666]

Hi, I still have the same problem and I just updated to the new version.
As soon as I find out something I will post it in this thread.