Crucial bx500 1tb no power

[KiTHardWare]

Need help with this case
In pc3k utility no power at all
After making fast diagnosis ( no short to ground )
I need to know which component to measure to fix this problem

Attachments

[fzabkar]

Check the input and output of the e-fuse (Current Limit Switch):

https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP5036A/

Then measure the voltages at each of the 3 inductors.

[KiTHardWare]

Check the input and output of the e-fuse (Current Limit Switch):

https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP5036A/

Then measure the voltages at each of the 3 inductors.

EN = 4.2v
Dv/Dt = 5v
Source = 5v
Vin = 5v
Gnd & Limite = 0v
Both indectors = 5v

[Lardman]

Both indectors = 5v

I think you may want to check those again, all 3 of them not just 2.

[fzabkar]

https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP2152/

https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP2151/document_id/4678/ (MP2151GTF-12)

https://i0.wp.com/theoverclockingpage.com/wp-content/uploads/2022/11/ssd-crucial-bx500-500gb-vrm-2.jpg

[KiTHardWare]

Both indectors = 5v

I think you may want to check those again, all 3 of them not just 2.

Thx i already check the third one on the top all work fine
I figured out the problem the 4 sata lines is damage

Attachments

[KiTHardWare]

https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP2152/

https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP2151/document_id/4678/ (MP2151GTF-12)

https://i0.wp.com/theoverclockingpage.com/wp-content/uploads/2022/11/ssd-crucial-bx500-500gb-vrm-2.jpg

Thx bro for resources case solve