Switch to full style
CompactFlash, SD, MMC, USB flash storage. Anything that does not have moving parts inside.
Post a reply

Has someone been successful with this SAMSUNG SSD

June 18th, 2025, 6:35

Guys
Has anyone been able to crack this MCU , portable doesn't support it.
SSD is detected with lower capacity .
Model No -Samsung MZ-VL25120
Attachments
Capture.PNG

Re: Has someone been successful with this SAMSUNG SSD

June 19th, 2025, 9:07

Have you considered reflowing the chips, especially the NAND ones?

Re: Has someone been successful with this SAMSUNG SSD

June 19th, 2025, 9:21

SOSdonnees wrote:Have you considered reflowing the chips, especially the NAND ones?


No considering delicate electronics & pcb , actually SSD is getting detected as 1 GB.Do you think Heating Nand with hot air might work?
Thanks for suggestion.

Re: Has someone been successful with this SAMSUNG SSD

June 20th, 2025, 15:50

higgsboson wrote:
SOSdonnees wrote:Have you considered reflowing the chips, especially the NAND ones?


No considering delicate electronics & pcb , actually SSD is getting detected as 1 GB.Do you think Heating Nand with hot air might work?
Thanks for suggestion.


Might. As it isn't able to load firmware from NAND (the 1 GB capacity is typical), one option is that NAND is 'detached'. But can also be simply firmware corrupt, same symptom, and without PC3000 support not a lot you can do.

Re: Has someone been successful with this SAMSUNG SSD

June 22nd, 2025, 2:02

IMHO reflow/reballing make things only worse. 99% cases not help.

Re: Has someone been successful with this SAMSUNG SSD

June 24th, 2025, 6:42

arvika wrote:IMHO reflow/reballing make things only worse. 99% cases not help.


Thanks arvika
your words are like Digital masters final judgements
I was sure this might not be issue related to electronics.Your post has came at right time :good:
Post a reply