All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: vid_090c pid_3000 63816F1FC0 samsung
PostPosted: January 25th, 2022, 6:48 
Offline
User avatar

Joined: December 5th, 2021, 11:34
Posts: 14
Location: Russia
I recorded freedos with mhdd and other programs on a USB flash drive. Then I booted from the flash drive and executed 'erase', 'hpdmbr' in the mhdd for my hitachi hdd. MHDD was unable to access the hitachi hdd. But when I pulled the flash drive and rebooted the computer, the flash drive was no longer readable. Different programs for working with flash drives do not recognize the flash drive, or give a read/write error or access is denied. When connected to windows, linux is not mounted, there is no drive letter, it is not formatted with console commands (read/write error). Where to buy a cheap USB flash drive and hard drive?


Top
 Profile  
 
 Post subject: Re: vid_090c pid_3000 63816F1FC0 samsung
PostPosted: January 25th, 2022, 15:38 
Offline
User avatar

Joined: May 13th, 2019, 7:50
Posts: 907
Location: Nederland
The guy further down the road has cheap hard drives and USB flash too.

_________________
Joep - http://www.disktuna.com - video & photo repair & recovery service


Top
 Profile  
 
 Post subject: Re: vid_090c pid_3000 63816F1FC0 samsung
PostPosted: January 29th, 2022, 5:09 
Offline
User avatar

Joined: December 5th, 2021, 11:34
Posts: 14
Location: Russia
femdone wrote:
... USB flash drive...

I had can restore on USB: Boot sector , FAT :lol: tables, create partition and format in fat32-windows using tide prodram in dos.
But usb not mounted in windows and linux still.
Also, I can now use Linux commands that did not work at all before:mkfs, fdisk,
but using command "dd if=/dev/zero", disk[4Gb] have rewritable 1,9Gb only.
In which program can I set the attributes of the USB?


Top
 Profile  
 
 Post subject: Re: vid_090c pid_3000 63816F1FC0 samsung
PostPosted: February 3rd, 2022, 10:07 
Offline
User avatar

Joined: December 5th, 2021, 11:34
Posts: 14
Location: Russia
Why is the flash drive indicator constantly lit?


Top
 Profile  
 
 Post subject: Re: vid_090c pid_3000 63816F1FC0 samsung
PostPosted: February 6th, 2022, 9:48 
Offline
User avatar

Joined: December 5th, 2021, 11:34
Posts: 14
Location: Russia
I don't know how: now the disk is mounted in the system, but it is still not write/readable. :roll:


Top
 Profile  
 
 Post subject: Re: vid_090c pid_3000 63816F1FC0 samsung
PostPosted: February 24th, 2022, 7:15 
Offline
User avatar

Joined: December 5th, 2021, 11:34
Posts: 14
Location: Russia
:?: i had finded on your site sanitary_erase.7z. what doing it is programm? i was executed it and saw error 4.


Top
 Profile  
 
 Post subject: Re: vid_090c pid_3000 63816F1FC0 samsung
PostPosted: February 24th, 2022, 12:17 
Offline
User avatar

Joined: February 12th, 2022, 10:23
Posts: 13
Location: Russia
Did you try diskpart in Windows (list disk, select disk n, clean, create partition primary, etc.)?
If it does not work, use ChipGenius to identify controller chip and look for specialized utilities (MPTool and such) if available.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group