MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: pin for safe mode
PostPosted: September 18th, 2026, 12:49 
Offline

Joined: April 25th, 2025, 10:22
Posts: 15
Location: italy
Hi everyone, this NVE is compatible with the PC3K, but I need to know which pins to use to put the drive into safe mode; has anyone worked on this before?
CT500P3SSD8E


Attachments:
WhatsApp Image 2026-09-18 at 18.44.36 (2).jpeg
WhatsApp Image 2026-09-18 at 18.44.36 (2).jpeg [ 685.19 KiB | Viewed 421 times ]
WhatsApp Image 2026-09-18 at 18.44.36 (1).jpeg
WhatsApp Image 2026-09-18 at 18.44.36 (1).jpeg [ 715.96 KiB | Viewed 421 times ]
WhatsApp Image 2026-09-18 at 18.44.36.jpeg
WhatsApp Image 2026-09-18 at 18.44.36.jpeg [ 574.31 KiB | Viewed 421 times ]
WhatsApp Image 2026-09-18 at 18.44.36 (3).jpeg
WhatsApp Image 2026-09-18 at 18.44.36 (3).jpeg [ 571.02 KiB | Viewed 421 times ]

_________________
Italia Assistance Data Recovery
Italian data recovery lab – HDD, SSD, NAS, RAID
Professional data recovery lab
Top
 Profile  
 
 Post subject: Re: pin for safe mode
PostPosted: September 19th, 2026, 18:14 
Offline
User avatar

Joined: September 16th, 2015, 9:06
Posts: 356
Location: Poland
How about those two BIG holes at the end of PCB?

_________________
odzyskiwanie danych


Top
 Profile  
 
 Post subject: Re: pin for safe mode
PostPosted: Yesterday, 9:15 
Offline

Joined: April 25th, 2025, 10:22
Posts: 15
Location: italy
melvin wrote:
How about those two BIG holes at the end of PCB?

i try it but not fuction

_________________
Italia Assistance Data Recovery
Italian data recovery lab – HDD, SSD, NAS, RAID
Professional data recovery lab


Top
 Profile  
 
 Post subject: Re: pin for safe mode
PostPosted: Yesterday, 11:18 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17230
Location: Australia
have u checked the supplies n efuse?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: pin for safe mode
PostPosted: Yesterday, 11:54 
Offline

Joined: April 25th, 2025, 10:22
Posts: 15
Location: italy
fzabkar wrote:
have u checked the supplies n efuse?

I haven't run any tests yet; I was hoping to find someone who had already worked on it to tell me the key points directly :D

_________________
Italia Assistance Data Recovery
Italian data recovery lab – HDD, SSD, NAS, RAID
Professional data recovery lab


Top
 Profile  
 
 Post subject: Re: pin for safe mode
PostPosted: Yesterday, 11:55 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17230
Location: Australia
measure the voltages at the inductors those are the key points

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: pin for safe mode
PostPosted: Today, 0:20 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3975
Location: Adelaide, Australia
fzabkar wrote:
measure the voltages at the inductors those are the key points

by 'Key points' I think they mean the points for shorting for test mode, not key as in relevant


Top
 Profile  
 
 Post subject: Re: pin for safe mode
PostPosted: Today, 1:02 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17230
Location: Australia
HaQue wrote:
fzabkar wrote:
measure the voltages at the inductors those are the key points

by 'Key points' I think they mean the points for shorting for test mode, not key as in relevant

What is the point of futzing about with safe mode if the basic tests of hardware functionality haven't been carried out? There are four stepdown converters and one e-fuse. It would take less than 5 minutes to locate the power supply test points and verify them.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: pin for safe mode
PostPosted: Today, 1:23 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17230
Location: Australia
Similar SSD ...

https://youtu.be/iEeRmszJzt8?t=298

_________________
A backup a day keeps DR away.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 106 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group