Page 1 of 1
Working Sandisk device req'd
Posted: February 23rd, 2009, 6:09
by pcimage
Hi Guys
Looking for a working Sandisk Cruzer Titanium, with the following controller on board:
20-99-00121-1
S647-720065
Cheers!!
Re: Working Sandisk device req'd
Posted: February 24th, 2009, 19:45
by quasimodo
Hello Sean,
I have a few Titanium's laying around. I would hate to open every one of them, to see if they are a match. What is the size for this jump drive?
Re: Working Sandisk device req'd
Posted: February 25th, 2009, 9:44
by pcimage
It's a 4Gb Cruzer Titanium
SDCZ27-4096
Thanks!!
Re: Working Sandisk device req'd
Posted: February 25th, 2009, 19:16
by quasimodo
I checked, but unfortunately I don't have any 4GB's.
Sorry
Re: Working Sandisk device req'd
Posted: February 26th, 2009, 11:09
by pcimage
Thanks for looking!
Re: Working Sandisk device req'd
Posted: February 26th, 2009, 14:51
by drc
You think one with the same controller but a different size flash chip would work?
Re: Working Sandisk device req'd
Posted: February 26th, 2009, 16:22
by pcimage
Quite possibly, yes.
Re: Working Sandisk device req'd
Posted: March 5th, 2009, 15:20
by drc
I checked through all of my stock but don't have that specific one, sorry.
Re: Working Sandisk device req'd
Posted: March 5th, 2009, 17:57
by pcimage
Thanks for looking drccsc
Re: Working Sandisk device req'd
Posted: March 11th, 2009, 3:48
by xehqter
I've never been able to transplant a SanDisk controller (20-99-00121-1 or 20-99-00099-2), all I get is a 64MB removable drive filled with zero's... Am I missing something? Does it need to be from the same batch?
Re: Working Sandisk device req'd
Posted: June 9th, 2009, 5:14
by datasolution
hi,
i m sachin vora can you send me open drive image.i do have threee sandisk 4gb titanium u3 pen drive.so pls send me picture of yr open drive