| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| This device cannot be accessed because it is smaller http://forum.hddguru.com/viewtopic.php?f=10&t=15836 |
Page 1 of 1 |
| Author: | HiraSysCom [ May 19th, 2010, 16:23 ] |
| Post subject: | This device cannot be accessed because it is smaller |
"This device cannot be accessed because it is smaller than 65535 sectors" As I can recover a 64 gb usb device. kingston if ever I get the above message and exits the program Can you help, as kingstong says can not do anything Very thanks |
|
| Author: | drc [ May 19th, 2010, 16:24 ] |
| Post subject: | Re: This device cannot be accessed because it is smaller |
64Gb? Sounds fake If it is genuine, sounds broken |
|
| Author: | craig6928 [ May 19th, 2010, 20:23 ] |
| Post subject: | Re: This device cannot be accessed because it is smaller |
if the card is real it will have the following On real Kingston USB drives on the side where it gives manufacturing info and states the size of the flash drive it should be etched in by a laser. It should not be a sticker nor should it be smooth. if you paid cheap for the card its more likely a fake like drc says its possible a fake that my money on this subject. i would say that 70% of usb driver pens on ebay that are high capacity are fakes try this website below http://sosfakeflash.wordpress.com/2008/ ... sh-drives/ http://files.extremeoverclocking.com/file.php?f=197. http://www.youtube.com/watch?v=mhqnrgpTFng http://sosfakeflash.wordpress.com/2009/ ... flashnews/ |
|
| Author: | pcimage [ May 21st, 2010, 3:06 ] |
| Post subject: | Re: This device cannot be accessed because it is smaller |
Also on real 64/128Gb Kingston devices, the model and capacity are laser etched into the metal on the USB connector. I had a genuine 128Gb Kingston in this week, and boy! was that fun!!! |
|
| Author: | drc [ May 21st, 2010, 9:10 ] |
| Post subject: | Re: This device cannot be accessed because it is smaller |
pcimage wrote: I had a genuine 128Gb Kingston in this week, and boy! was that fun!!! Urf... |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|