No I use PC3000 and with the support of Ace I have success now
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| SM3251L BB http://forum.hddguru.com/viewtopic.php?f=10&t=16645 |
Page 1 of 1 |
| Author: | Zero Alpha [ August 10th, 2010, 8:52 ] |
| Post subject: | SM3251L BB |
Has anybody successfully recovered from one of these? Pendrive Lexar 4GB SM3251L BB 1 x BNL63B5IK3WG 1 x dump |
|
| Author: | hddguy [ August 10th, 2010, 10:43 ] |
| Post subject: | Re: SM3251L BB |
I have not seen SM325 controller, but I hear they are not so nice to work on... |
|
| Author: | pcimage [ August 10th, 2010, 15:59 ] |
| Post subject: | Re: SM3251L BB |
Yes, have done these. Nasty pieces of work. Very odd geometry, requiring a cross-bank mix and manual conflict corrections. |
|
| Author: | Zero Alpha [ August 10th, 2010, 19:58 ] |
| Post subject: | Re: SM3251L BB |
That's right they suck bad and I keep getting them sent here. I don't think anybody has solved its translation. |
|
| Author: | code_slave [ August 11th, 2010, 19:19 ] |
| Post subject: | Re: SM3251L BB |
Do you have a picture of the case/PCB / full lexar model number. or any other brand/ model number that uses this controller. I'd like to pick one of these up in HK/China so I can take a look using my 'kit'. |
|
| Author: | granaryloaf [ August 13th, 2010, 2:48 ] |
| Post subject: | Re: SM3251L BB |
I have had a few of these. They are quite fiddly but recoverable. Are you using soft-center? |
|
| Author: | Zero Alpha [ August 16th, 2010, 5:16 ] |
| Post subject: | Re: SM3251L BB |
No I use PC3000 and with the support of Ace I have success now
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|