HDD GURU FORUMS
http://forum.hddguru.com/

How to identify different drives using HDD raw copy
http://forum.hddguru.com/viewtopic.php?f=10&t=22272
Page 1 of 1

Author:  swifttom [ March 5th, 2012, 9:18 ]
Post subject:  How to identify different drives using HDD raw copy

Hi I would like to know how can one differentiate between 2 exact flash disk drives when using HDD raw copy. I am just terrified I make an image of the blank drive over the one with all the data on.

Author:  loki [ March 5th, 2012, 10:43 ]
Post subject:  Re: How to identify different drives using HDD raw copy

If using windows try looking in disk management. Plug one flash drive in & it will tell you what it is ie disk1 etc then plug second one in & check again ie disk2

loki

Author:  pad15 [ March 7th, 2012, 22:58 ]
Post subject:  Re: How to identify different drives using HDD raw copy

You can make an image of the first flash disk containg data
to a file onto your hard disk, then plug the blank one and write
from the image file.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/