Hello,

I found the following link regarding this chip:

http://www.flash-extractor.com/library/ ... 99_83__2x2

Is there any way I can plug this data into the Flash Doctor software (or the PC3000 Flash SSD software) to re-combine the chips and recover the data. I have the .dmp files from the chips.

Many thanks,

Mark

I agree with models and layouts it is at least part automated, but still is much more to do in manual and also with many different XOR, especially SM XOR, SC has much added support. For this alone SC can make good results in most cases.

But a colleague here with me uses manual work in PC3000 every day and is at top 5 posters of solutions, so maybe he also would not agree with me

It depends if PC3000 has support for this specific XOR (PS2233 1074-1070 Xor 6771_94 ). I am not sure...

Xor 6771_94
This is strange 94, PC3000 XOR need some transformation.
And this chip read with definite rules.
What config used FlashDoctor?

Hello all,

I got the SC Flash Extractor license and hardware through.

I managed to read the chips, and rebuild the data into a recoverable image within about an hour of unboxing the unit.

I'm very impressed, money well spent.

Regards,

Nice

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

It is quiet difficult to perform manual recoveries on PC 3000 Flash.

Crystal Computers
India

2010, I began to use the SC tool, it gave me a lot of help. PC3000FLASH,Used these two highly complementary tools. As for its evaluation sometimes one-sided phenomenon, I think: the tool is only a means, the users quality is the most important.