HDD GURU FORUMS
http://forum.hddguru.com/

disassembly monolith flash drive
http://forum.hddguru.com/viewtopic.php?f=10&t=26557
Page 1 of 1

Author:  networkpc3000 [ August 2nd, 2013, 22:26 ]
Post subject:  disassembly monolith flash drive

more details photo http://www.rflashdata.com

Attachments:
File comment: monolith pinout
monolith pinout.jpg
monolith pinout.jpg [ 62.31 KiB | Viewed 8421 times ]
File comment: monolith flash drive data recovery
monolith flash drive data recovery.jpg
monolith flash drive data recovery.jpg [ 75.43 KiB | Viewed 8421 times ]
File comment: monolith data recovery
monolith data recovery.jpg
monolith data recovery.jpg [ 56.86 KiB | Viewed 8421 times ]
File comment: disassembly monolith flash drive
disassembly monolith flash drive.jpg
disassembly monolith flash drive.jpg [ 62.49 KiB | Viewed 8421 times ]
File comment: disassembly monolith flash drive for data recovery
disassembly monolith flash drive for data recovery 1.jpg
disassembly monolith flash drive for data recovery 1.jpg [ 88.56 KiB | Viewed 8421 times ]
File comment: disassembly monolith flash drive for data recovery
disassembly monolith flash drive for data recovery 1.jpg
disassembly monolith flash drive for data recovery 1.jpg [ 88.56 KiB | Viewed 8421 times ]

Author:  HaQue [ August 2nd, 2013, 23:09 ]
Post subject:  Re: disassembly monolith flash drive

Nice :-)

data surely not recoverable after this.. this is a demo of what internals look like isn't it?

What magnification is that at around 100-200x ?

really cool!

Author:  networkpc3000 [ August 3rd, 2013, 2:30 ]
Post subject:  Re: disassembly monolith flash drive

i think data still can be recoverable. as chip no damaged.
for this case. it's bad donor drive. pinout made. but i have problem with read dump so i want to check inside connection.
how many X i am no sure. around 60~80X only

Author:  HaQue [ August 3rd, 2013, 2:39 ]
Post subject:  Re: disassembly monolith flash drive

I hope you can get data, good luck.

So how do you connect wires to something so small. I thought it was hard enough to connect to the regular row of 40 pads on the outside of the monolith, but this is a whole different level.

It is really interesting to see things Ill never see in the flesh, so thanks again.

Author:  networkpc3000 [ August 3rd, 2013, 22:56 ]
Post subject:  Re: disassembly monolith flash drive

this case connect wire easy.
http://www.rflashdata.com/kingston-1g-sd/
it's hard for me. i make this solution with luck. need improve skill for process such case. as many case like this.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/