HDD GURU FORUMS http://forum.hddguru.com/
DMDE getting stuck at 57 per cent http://forum.hddguru.com/viewtopic.php?f=10&t=30415	Page 1 of 1

---

Author:	ontariotech [ January 23rd, 2015, 13:58 ]
Post subject:	DMDE getting stuck at 57 per cent
I have a SD card here which I am trying to image (for the purposes of data rec). I am using DMDE (latest version). However, it gets stuck at 57 per cent every time. When I go to an image in "reverse mode" - it gets stuck at 43 per cent! Any solutions or workarounds would be great?

---

Author:	labtech [ January 23rd, 2015, 14:00 ]
Post subject:	Re: DMDE getting stuck at 57 per cent
Not sure what the problem is exactly, but 57 + 43 = 100. Realize that there are probably few missing areas, but putting the images together as one should not be too difficult and get most of the daters.

---

Author:	lcoughey [ January 23rd, 2015, 14:09 ]
Post subject:	Re: DMDE getting stuck at 57 per cent
The other option is to use an imaging program that logs your progress so that you can jump around and flip into reverse and have a very accurate idea of how many sectors are missing. For this, I recommend GNU ddrescue.

---

Author:	ontariotech [ January 23rd, 2015, 14:11 ]
Post subject:	Re: DMDE getting stuck at 57 per cent
ok, I have 2 x .bin files (one has 57 per cent that other has 43 per cent) . How do i join these and extract data from the single file created?

---

Author:	labtech [ January 23rd, 2015, 14:12 ]
Post subject:	Re: DMDE getting stuck at 57 per cent
WinHex should be good right off the top of my head

---

Author:	ontariotech [ January 23rd, 2015, 14:12 ]
Post subject:	Re: DMDE getting stuck at 57 per cent
Thanks Luke. I will give GNU ddrescue a try also.

---

Author:	arvika [ January 23rd, 2015, 15:20 ]
Post subject:	Re: DMDE getting stuck at 57 per cent
Join two images, recover data. Simple

---

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/