hello!

i'm looking for LA.

for analyze monolithic memory's pin out signal.

i found this LA.

it's LA5034.

http://www.ebay.com/itm/34CH-500MHz-USB ... 4183424aa9

it is $117.90 with free shipping.

very cheap!

I have a Hantek 4032L and to call it a steaming pile of dog turd would be to insult the dog turd.

the 5034 has a Memory Depth of 68Kbits. You need to find out if you use lots of channels, does the sample rate decrease.

There is no cheap way out for a LA for monoliths as far as I can see.

Why not buy it and see, and report back? and if it is a pile of junk, resell it for close to what you paid.

also last real update for the software was in 2012. aside from a small language update it is stagnant. Another very desirable feature is NAND Protocol decoder.

Garbage

_________________
Recover My Flash Drive

The garbage in my trash bin was VERY offended that you compared this LA to it Jeremy!

thanks a lot!

if so, what is best LA for analyze monolithic memory?

http://www.ebay.com/itm/Zeroplus-LAP-C- ... 3f3dbe07c0

it's very expensive.

is it good?

yes I think this will do, probably the minimum you would want..

good thing about this is:

http://www.zeroplus.com.tw/logic-analyzer_en/products.php?product_id=314&pdn=10&pdnex=12

I don't know much about the "proper" Logic Analysers as opposed to these PC based ones, but from what I have seen this one might be fine