| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| how's about this logic analyzer for monolith? http://forum.hddguru.com/viewtopic.php?f=10&t=30486 |
Page 1 of 1 |
| Author: | Hee [ February 2nd, 2015, 20:30 ] |
| Post subject: | how's about this logic analyzer for monolith? |
hello! i'm looking for LA. for analyze monolithic memory's pin out signal. i found this LA. it's LA5034. http://www.ebay.com/itm/34CH-500MHz-USB ... 4183424aa9 it is $117.90 with free shipping. very cheap! |
|
| Author: | HaQue [ February 2nd, 2015, 20:49 ] |
| Post subject: | Re: how's about this logic analyzer for monolith? |
I have a Hantek 4032L and to call it a steaming pile of dog turd would be to insult the dog turd. the 5034 has a Memory Depth of 68Kbits. You need to find out if you use lots of channels, does the sample rate decrease. There is no cheap way out for a LA for monoliths as far as I can see. Why not buy it and see, and report back? and if it is a pile of junk, resell it for close to what you paid. also last real update for the software was in 2012. aside from a small language update it is stagnant. Another very desirable feature is NAND Protocol decoder. |
|
| Author: | jeremyb [ February 3rd, 2015, 12:38 ] |
| Post subject: | Re: how's about this logic analyzer for monolith? |
Garbage |
|
| Author: | HaQue [ February 3rd, 2015, 18:33 ] |
| Post subject: | Re: how's about this logic analyzer for monolith? |
The garbage in my trash bin was VERY offended that you compared this LA to it Jeremy! |
|
| Author: | Hee [ February 4th, 2015, 21:01 ] |
| Post subject: | Re: how's about this logic analyzer for monolith? |
thanks a lot! if so, what is best LA for analyze monolithic memory? http://www.ebay.com/itm/Zeroplus-LAP-C- ... 3f3dbe07c0 it's very expensive. is it good? |
|
| Author: | HaQue [ February 4th, 2015, 23:45 ] |
| Post subject: | Re: how's about this logic analyzer for monolith? |
yes I think this will do, probably the minimum you would want.. good thing about this is: http://www.zeroplus.com.tw/logic-analyzer_en/products.php?product_id=314&pdn=10&pdnex=12 I don't know much about the "proper" Logic Analysers as opposed to these PC based ones, but from what I have seen this one might be fine |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|