Switch to full style
CompactFlash, SD, MMC, USB flash storage. Anything that does not have moving parts inside.
Post a reply

how to restore original capacity to SD card

March 3rd, 2015, 6:27

Hi all,
I have SD card sharpen sd card 32GB 60MB/s 400x

Image

it was fine but last time during it's connect with a laptop the capacity change to only 29 MB
and it doesn't give me full space in Disk Management

Image

as well as in disk part

Image

How I can restore the full capacity to SD card?

Re: how to restore original capacity to SD card

March 3rd, 2015, 8:15

controller issue damaged
data can be extracted
fixing it,,, better buy new (not expensive)

Re: how to restore original capacity to SD card

March 4th, 2015, 0:11

Expanding on einstein9

agree controller is bad.

A DR shop would need to read the NAND chips to get the DATA.. as long as tools support the flash chips and structure/algo's.

And that is a Compact Flash card, NOT an SD card.

I realise it is expensive, but a new one is required, this one is cactus.

Re: how to restore original capacity to SD card

March 4th, 2015, 5:46

thanks einstein9 and HaQue for replay,,
Post a reply