| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Monolithic Pinout http://forum.hddguru.com/viewtopic.php?f=10&t=30753 |
Page 1 of 1 |
| Author: | HaQue [ March 18th, 2015, 17:43 ] |
| Post subject: | Re: Monolithic Pinout |
I may have a donor if that is any good? I will have to check for match |
|
| Author: | jeremyb [ March 19th, 2015, 3:45 ] |
| Post subject: | Re: Monolithic Pinout |
HaQue wrote: I may have a donor if that is any good? I will have to check for match Its from a SanDisk Cruzer Switch.. I thought i'd save myself the hassle and see if anyone has the pinout.. |
|
| Author: | grig85 [ March 26th, 2015, 1:28 ] |
| Post subject: | Re: Monolithic Pinout |
does anyone have a pinout for this? |
|
| Author: | arvika [ March 26th, 2015, 5:18 ] |
| Post subject: | Re: Monolithic Pinout |
I have 90%. Have problem with two signals |
|
| Author: | HaQue [ March 26th, 2015, 6:36 ] |
| Post subject: | Re: Monolithic Pinout |
do you need to drill to another layer maybe? |
|
| Author: | arvika [ March 26th, 2015, 14:00 ] |
| Post subject: | Re: Monolithic Pinout |
Better if I can get Xray photo. |
|
| Author: | grig85 [ March 26th, 2015, 14:58 ] |
| Post subject: | Re: Monolithic Pinout |
arvika wrote: Better if I can get Xray photo. I could get one made if you willing to share the pinout |
|
| Author: | arvika [ March 26th, 2015, 16:19 ] |
| Post subject: | Re: Monolithic Pinout |
Sorry, but i do not share the pinouts. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|