| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| SSD Caddy/Enclosure http://forum.hddguru.com/viewtopic.php?f=10&t=32194 |
Page 1 of 1 |
| Author: | Rob1977 [ October 28th, 2015, 8:52 ] | ||
| Post subject: | SSD Caddy/Enclosure | ||
Hi I'm looking for a caddy or enclosure to connect my SSD drive externally or even internally for my desktop maybe PCI-e expansion card? I've had a look around the internet but can't see anything to fit. I would prefer to get parts from the UK, time is a factor. The SSD is Model MZ-jpv128r/0a2. Any help or information on this would be much appreciated. Ive attached an image of the interface. Thanks Rob
|
|||
| Author: | data-medics [ October 28th, 2015, 9:23 ] |
| Post subject: | Re: SSD Caddy/Enclosure |
I believe this is what you're looking for: http://www.pc-adapter.net/products/747.html I don't think you'll find any in the UK, as I'm pretty sure this is the only place that makes an adapter for it. |
|
| Author: | jermy [ October 28th, 2015, 9:37 ] |
| Post subject: | Re: SSD Caddy/Enclosure |
or maybe a usb ? |
|
| Author: | data-medics [ October 28th, 2015, 9:46 ] |
| Post subject: | Re: SSD Caddy/Enclosure |
Interesting, I haven't seen that one before. Anyone know if it actually works? I know even the PCIe one can be touchy, and doesn't seem to work all the time. |
|
| Author: | Dmitri [ October 28th, 2015, 10:08 ] |
| Post subject: | Re: SSD Caddy/Enclosure |
Rob1977 wrote: SSD is Model MZ-jpv128r/0a2 Besides the SSD model, could you also mention the notebook model (LNNNN or LLNNN)? |
|
| Author: | Rob1977 [ October 28th, 2015, 10:51 ] |
| Post subject: | Re: SSD Caddy/Enclosure |
Model number A1466 |
|
| Author: | Rob1977 [ October 29th, 2015, 6:05 ] |
| Post subject: | Re: SSD Caddy/Enclosure |
Is it just that one card from China? |
|
| Author: | Dmitri [ October 29th, 2015, 7:15 ] |
| Post subject: | Re: SSD Caddy/Enclosure |
Rob1977 wrote: Is it just that one card from China? For this model choice is very limited at the moment. I would also love to find a SATA adapter for our internal recovery experiments with these SSDs. With PCIe one system hangs too frequently. |
|
| Author: | Rob1977 [ October 29th, 2015, 18:22 ] |
| Post subject: | Re: SSD Caddy/Enclosure |
Spoke to the company that sells the USB version and they say it won't fit. There's a slight differences. So square one. |
|
| Author: | Rob1977 [ October 30th, 2015, 5:29 ] |
| Post subject: | Re: SSD Caddy/Enclosure |
Dmitri have you been able to run one of these cards? |
|
| Author: | HaQue [ October 30th, 2015, 11:01 ] | ||
| Post subject: | Re: SSD Caddy/Enclosure | ||
This is the one I bought, works well, used extensively for 2 weeks straight and no issues. http://www.computeronline.com.au/products_pic.php?C_ID=30&S_ID=500&PROD=59177
|
|||
| Author: | pcimage [ October 30th, 2015, 15:30 ] |
| Post subject: | Re: SSD Caddy/Enclosure |
That's the one I use too 
|
|
| Author: | falther [ October 30th, 2015, 18:04 ] |
| Post subject: | Re: SSD Caddy/Enclosure |
These SSD are out of / for Apple MacBooks from mid 2013 up to now. I have digged in the internet the last weeks and this is the result: - the adapter shown by PCIMAGE, - then there is a USB 3.0 case from OWC = OWCMAU3ENPRPCI . (be carefull only to check for this type) costs around $ 150,- - and the optional adapter from Atola for the Atola Insight Forensic falther +++ |
|
| Author: | Rob1977 [ November 13th, 2015, 13:38 ] |
| Post subject: | Re: SSD Caddy/Enclosure |
Hi, this card worked for me, didn't have a PCI-4x slot but it fits in a 16x fine. Thanks for help. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|