Connector repair on a Samsung mmdoe28gxmsp SATA LIF
Posted: February 5th, 2016, 13:22
Does anyone know how to connect wires to the board to go to a SATA interface?
The board has a row of six then two hole through solder points as well, i was wondering if these can be used for recovery or powering the unit?
http://imgur.com/OrqyQi0
The board has a row of six then two hole through solder points as well, i was wondering if these can be used for recovery or powering the unit?
http://imgur.com/OrqyQi0