HDD GURU FORUMS
http://forum.hddguru.com/

Kingston DT101G2 16GB [ Controller SSS6695 ,Strange NAND ]
http://forum.hddguru.com/viewtopic.php?f=10&t=34736		 Page 1 of 1
Author:  Amarbir[CDR-Labs] [ December 29th, 2016, 7:52 ]
Post subject:  Kingston DT101G2 16GB [ Controller SSS6695 ,Strange NAND ]
Hello Everyone ,
Got This Drive [ USB Flash ] , God Why The Hell Cannot i Get Simple Cases To Learn And Earn [ Arvika ,Jermyb And Haque Can You Folks Tell Me Come Controllers and Memory Chips That i Can Help Myself In The Learning Process ] .This is a Kingston DT101G2 16GB .The Thing Is That It Has a Controller SSS6695 That is Not Present Here - > http://www.flash-extractor.com/library/SSS/ And Also Here -> http://www.pc-3000flash.com/solbase/ind ... 1&lang=eng .I Do Not Have Access To Rusolut [ Sasha I Am Saving Money For This Now ,Might Be You Can Extend The Curtsy To The Forums ] .The NAND Chip Was Also Having a Very Rare Marking " FT16B08UCT2-55" Which ID's As " 0x983AA892 " .This ID Possibly Is Quite Common In Acelab Global Solution Center .Has Anyone Worked On This Exact Combination ? . I Have Read The NAND ID And Now i Am Reading The Same ,Once Done I Will Work On This a Little And Let You Know Whats The Progress In This Case .

Controller Details By One Software Are Below

Controller: SSS 6695 BD
Possible Memory Chip(s): Not available
VID: 0C76
PID: 0005

Screenshot Of Progress

Image
Author:  arvika [ December 29th, 2016, 8:13 ]
Post subject:  Re: Kingston DT101G2 16GB [ Controller SSS6695 ,Strange NAND
Start from older Phison controllers.
Author:  Amarbir[CDR-Labs] [ December 29th, 2016, 12:15 ]
Post subject:  Re: Kingston DT101G2 16GB [ Controller SSS6695 ,Strange NAND
arvika wrote:
Start from older Phison controllers.


Hello,
Any specific models and whats special in these
Author:  Amarbir[CDR-Labs] [ December 30th, 2016, 12:03 ]
Post subject:  Re: Kingston DT101G2 16GB [ Controller SSS6695 ,Strange NAND
Sir ,
Nailed This One Too ...

Preparations should be:

1. Possible Bad Columns cutting;
2. XOR;
3. ECC on XOR;
4. First typical Interleave;
5. Second typical Interleave;

Then - RAW on last string of transform graph. Right now it's not possible to build image for SSS6695-6-7-8 family. Translator under developing.

PS : Acelab does not have a ready translator for this hence data in file structure wise was not possible ,Is this possible with Rusolut And Softcenter Tools As Of Now ? .Case is Solved Though
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/