ocz trion busy all the time

[jrg]

Hello every body

i have this ocz trion the ssd is busy all the time

i measure all voltages points described in this post viewtopic.php?f=10&t=32997&hilit=q300, and all voltages is ok, thanks fzabkar to do this apport.

and in this post in the acelab forum, http://forum.acelaboratory.com/viewtopic.php?t=8881, they comfirm this ssd dont have support, but is a little old.

i have the version 2.3.1 of pc3k ssd in the acelab page i don't see any confirmation if the new version the 2.4 have support for the controller the ps3110, anyone knows if the new version have support?

and another question, someone try to read the memories and achieve recover the data?

thanks very much

[Amarbir[CDR-Labs]]

Hello every body

i have this ocz trion the ssd is busy all the time

i measure all voltages points described in this post viewtopic.php?f=10&t=32997&hilit=q300, and all voltages is ok, thanks fzabkar to do this apport.

and in this post in the acelab forum, http://forum.acelaboratory.com/viewtopic.php?t=8881, they comfirm this ssd dont have support, but is a little old.

i have the version 2.3.1 of pc3k ssd in the acelab page i don't see any confirmation if the new version the 2.4 have support for the controller the ps3110, anyone knows if the new version have support?

and another question, someone try to read the memories and achieve recover the data?

thanks very much

Hi ,
There is no mention of Ps3110 support but you can always ask ,Roman at acelab is a great guy to interact with

[jrg]

And any one have success puting the memories in a healthy drive? Or this is not posible because the controller encrypted the data