HDD GURU FORUMS

Does anyone have the pinouts for a BGA095 chip?

I'm having trouble with one particular pin/contact, and I'm wondering if that pin is necessary or not.

Thanks in advance!

which one??
can you put up a pic and chip number printed on it, plus pin assignments you are using?

Don't have pictures now, but it's this kind of memory chip.
http://www.teeltech.com/wp-content/uplo ... rofile.jpg

KLUBG461BD

these are UFS chips. Readers are $$$$ and adapters are expensive too.
https://multi-com.eu/,details,id_pr,21723,key,programmer-ufs-emmc-emcp-nuprog-e,smenu,forensic_tools.html

or you could get these guys to do it. (watch their video):

https://multi-com.eu/,details,id_pr,21724,key,reading-data-image-ufs-in-binary-format-chip-off,smenu,forensic_tools.html



UFS links:
https://www.jedec.org/standards-documents/focus/flash/universal-flash-storage-ufs
https://www.teeltech.com/wp-content/uploads/2017/05/Teel-Tech-Dediprog-Brochure.pdf
http://www.keysight.com/upload/cmc_upload/All/7_WE7Slides_PoweringTheNextMobileGeneration.pdf
https://www.arasan.com/products/ufs/ufs-device/
etc...


discussion:
http://forum.acelaboratory.com/viewtopic.php?t=8987&start=15

@giroot: all of UFS uses G3 2Lane interface for communication - this is totally different from known normal eMMC transfer which is also commonly used in SD/microSD Cards so Command, Clock synchronisation and Data lines (1,4,8 bit) - it's rather SCSI model if we talk about architecture. So you are looking for pinout for G3 2Lane or NAND pinout for this chip to read this chip over VNR, FE, PC3000 ?

P.S
Look at here - I think this will give you some clue Link: https://multi-com.pl/pimg/IMG_1063.JPG