| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| OCZ Vertex 3 (VTX3-25SAT3-120G) (No BIOS detection) http://forum.hddguru.com/viewtopic.php?f=10&t=36259 |
Page 1 of 1 |
| Author: | sourcerer [ January 2nd, 2018, 11:51 ] |
| Post subject: | Re: OCZ Vertex 3 (VTX3-25SAT3-120G) (No BIOS detection) |
You can attach to the serial port (RX/TX/GND) on the upper left, and you should see some output from the SSD when it is starting. That output might help to diagnose the problem. |
|
| Author: | fzabkar [ January 2nd, 2018, 15:31 ] |
| Post subject: | Re: OCZ Vertex 3 (VTX3-25SAT3-120G) (No BIOS detection) |
I suspect that J5 may be a shorting point to place the SSD in "safe mode". I would first test for continuity between the round pad and the R/B pin of the NAND array. Also check whether the square pad is grounded. For reference ... ispPAC-POWR607, Lattice Semiconductor, Programmable Power Supply Supervisor, Reset Generator and Watchdog Timer: http://www.latticesemi.com/~/media/LatticeSemi/Documents/DataSheets/ispPAC/ispPAC-POWR607DataSheet.pdf?document_id=21806 EN6337QI, Enpirion, 3A Voltage Mode Synchronous Buck PWM DC-DC Converter with Integrated Inductor: https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ds/en6337qi_05800.pdf AT24C256C, Atmel, marking 2ECL, I2C Serial EEPROM, 32K x 8, 1.7V - 5.5V: http://www.atmel.com/images/atmel-8568-seeprom-at24c256c-datasheet.pdf IRF9910, International Rectifier, dual n-channel MOSFET, SO-8, 20V, 10A/12A, marking F9910: http://www.farnell.com/datasheets/172972.pdf EP53A8HQI, Enpirion, marking AMxx, 1A PowerSoC, Voltage Mode Synchronous PWM Buck w/ Integrated Inductor, 16-pin QFN, Vin = 2.4 - 5.5V: https://www.altera.co.jp/content/dam/altera-www/global/en_US/pdfs/literature/ds/ep53a8lqi_03651.pdf |
|
| Author: | Levis [ January 3rd, 2018, 4:31 ] |
| Post subject: | Re: OCZ Vertex 3 (VTX3-25SAT3-120G) (No BIOS detection) |
Guys really thank you for your answers. I will start reading from serial port as suggested by Sourcerer, I have a SiLabs CP2102, I think I will be able to read something. Then I will start exploring the jumper J5, but I have to read "some" references before. I hope there are possibilities... |
|
| Author: | einstein9 [ January 3rd, 2018, 4:52 ] |
| Post subject: | Re: OCZ Vertex 3 (VTX3-25SAT3-120G) (No BIOS detection) |
Find out the link between the following image link & your uploaded image http://z3x-team.com/wp-content/uploads/2013/05/3.png you will like the idea |
|
| Author: | Levis [ January 3rd, 2018, 5:00 ] |
| Post subject: | Re: OCZ Vertex 3 (VTX3-25SAT3-120G) (No BIOS detection) |
Thank you Einstein, challenge accepted |
|
| Author: | einstein9 [ January 3rd, 2018, 10:25 ] |
| Post subject: | Re: OCZ Vertex 3 (VTX3-25SAT3-120G) (No BIOS detection) |
Its not a Challenge Levis ... more like another door to the other side.. good luck |
|
| Author: | Levis [ January 3rd, 2018, 13:30 ] |
| Post subject: | Re: OCZ Vertex 3 (VTX3-25SAT3-120G) (No BIOS detection) |
einstein9 wrote: Its not a Challenge Levis ... more like another door to the other side.. good luck The challenge for me is to understand the other door |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|