July 4th, 2018, 13:24
July 4th, 2018, 18:19
July 4th, 2018, 20:13
July 5th, 2018, 0:38
July 5th, 2018, 2:58
July 5th, 2018, 5:15
July 5th, 2018, 5:27
July 5th, 2018, 5:28
July 5th, 2018, 7:02
July 5th, 2018, 8:11
July 5th, 2018, 18:14
nicoalbrecht wrote:No imaging is spot on at 150mb/s but cuts out every 3min with bad blocks. 500Gb imaged with less than 0.2% not readable. I am happy with that. Still not sure what happened to the drive, controller got quite hot around 50 degrees but not over heating.
July 6th, 2018, 4:08
July 6th, 2018, 15:38
As discussed earlier SK hynix CANVAS SL308 as a controller chip acts SK hynix SH87820BB, which is a re-mark model Link A Media (LAMD) LM87800AA. In this case, the controller uses SK hynix SH87810AA, which includes two ARM Cortex-R4 cores operating at a frequency of 333 MHz.
December 4th, 2020, 15:41
December 4th, 2020, 15:44
February 12th, 2021, 16:49
I marked the components I would start to check on this Hynix SSD PCIe NVMe.
I haven't been able to find a datasheet for the SM6741 PMIC, but the SM6742 appears to be similar. SM6742, Silicon Mitus, PMIC, 4 x bucks, 1 x boost converter, 3 x power pass switches, I2C programmable, 2.6V - 3.6V in, QFN-40:
February 25th, 2024, 18:31
Powered by phpBB © phpBB Group.