Anyone ID one of these chips yet either in PC3K Flash or VNR? They are the ones used in the iPhone and are now being seen in a lot of flash drives.
| Attachments: |
|
iPhone Style NAND.jpg [ 1.8 MiB | Viewed 6617 times ] |
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Anyone ID one of these chips yet? http://forum.hddguru.com/viewtopic.php?f=10&t=37190 |
Page 1 of 1 |
| Author: | ddrecovery [ July 31st, 2018, 15:15 ] | ||
| Post subject: | Anyone ID one of these chips yet? | ||
Anyone ID one of these chips yet either in PC3K Flash or VNR? They are the ones used in the iPhone and are now being seen in a lot of flash drives.
|
|||
| Author: | jeremyb [ August 1st, 2018, 16:26 ] |
| Post subject: | Re: Anyone ID one of these chips yet? |
Can you give make model flash drive that they are always in, I'll order one and solve it. |
|
| Author: | ddrecovery [ August 1st, 2018, 16:38 ] | ||
| Post subject: | Re: Anyone ID one of these chips yet? | ||
I have had two so far. Both are from PNY's, one 64GB and one 128GB. Controllers are pretty standard so if we can read the chip we should be good. One: AM6998E Second: PS2251 Thanks 
|
|||
| Author: | MasterT [ August 1st, 2018, 17:39 ] |
| Post subject: | Re: Anyone ID one of these chips yet? |
http://forum.acelaboratory.com/viewtopi ... 235&t=9569 viewtopic.php?f=27&t=36968 |
|
| Author: | ddrecovery [ August 1st, 2018, 17:47 ] |
| Post subject: | Re: Anyone ID one of these chips yet? |
MasterT wrote: http://forum.acelaboratory.com/viewtopic.php?f=235&t=9569 viewtopic.php?f=27&t=36968 I did see these but one post is 6 months old and the other 3. Just wondered if anything has changed. |
|
| Author: | HaQue [ August 1st, 2018, 21:52 ] |
| Post subject: | Re: Anyone ID one of these chips yet? |
go to flashboot or whatever, get the controller pinout (phison most likely would be there) and trace the pins from controller to nand chip. put the continuity beep function on multmeter. put one probe on pin 1, the other test all nand pads on PCB. when you get a beep, map pin of controller to pad of nand. make a paper map, there are controller pinouts on I think Flashboot.ru or usbdev or something. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|