| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Stacked TSOP Chip Question http://forum.hddguru.com/viewtopic.php?f=10&t=37613 |
Page 1 of 1 |
| Author: | ddrecovery [ October 29th, 2018, 19:40 ] | ||
| Post subject: | Stacked TSOP Chip Question | ||
I have a Corsair USB drive with stacked TSOP chips (see pic). The PCB at the connector has been severely damaged so we need to complete a chip off I presume these chips need to be removed retaining the integrity of the stacked chips? Once removed can they be read in a reader stacked like this? Any help would be appreciated.
|
|||
| Author: | HaQue [ October 29th, 2018, 22:13 ] |
| Post subject: | Re: Stacked TSOP Chip Question |
yes put in reader like this, don't separate them. at least in the case of NR. |
|
| Author: | arvika [ October 30th, 2018, 2:20 ] |
| Post subject: | Re: Stacked TSOP Chip Question |
I have case with stacked chips last week. Do not separate it, read as is. |
|
| Author: | pcimage [ October 30th, 2018, 2:30 ] |
| Post subject: | Re: Stacked TSOP Chip Question |
Same here, I have seen several stacked chips like this. Keep them together and read as one unit. |
|
| Author: | Sasha Sheremetov [ October 30th, 2018, 5:17 ] |
| Post subject: | Re: Stacked TSOP Chip Question |
In case if you read it in VNR, keep them stacked together, as I remember they have shared databus where one chip connected to CE0,1 and other one to CE2,3 (4 dies/crystals in total). |
|
| Author: | ddrecovery [ October 30th, 2018, 11:15 ] |
| Post subject: | Re: Stacked TSOP Chip Question |
Thanks everyone. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|