Page 1 of 1
I can not get ID for Kingston 2GB microSD Card
Posted: February 8th, 2019, 14:48
by Giroot
I'm trying to read data from a Kingston 2GB microSD Card with proper pin out.
But I'm unable to get a proper ID
The ID reads: 0x00000000
Re: I can not get ID for Kingston 2GB microSD Card
Posted: February 8th, 2019, 15:52
by arvika
As I see you try connect probably by spider. Did you try other reader?
Re: I can not get ID for Kingston 2GB microSD Card
Posted: February 8th, 2019, 16:46
by Giroot
arvika wrote:As I see you try connect probably by spider. Did you try other reader?
Tried on SC reader, gave ID as: 01010101
Re: I can not get ID for Kingston 2GB microSD Card
Posted: February 8th, 2019, 17:44
by arvika
Check short between VCC and GND.
Re: I can not get ID for Kingston 2GB microSD Card
Posted: February 15th, 2019, 20:33
by Giroot
arvika wrote:Check short between VCC and GND.
Checked for resistance between VCC and GND, there is no short, and it showed ~150 Ohms.