HDD GURU FORUMS
http://forum.hddguru.com/

un identified data from failure CF CARD
http://forum.hddguru.com/viewtopic.php?f=10&t=38129		 Page 1 of 1
Author:  applpp22 [ February 28th, 2019, 0:58 ]
Post subject:  un identified data from failure CF CARD
Scandisk Extreme pro (UDMA7)

Created Image from Cf card because Card Have Bad Sectors ( Unreadable Sectors)
After Successfully imaged 97.5% of card , tried In R-studio
R-Studio Does Not Recognized File System and even does not recognized raw files
when Before problem it have exFAT System on it ..

Code:
C8 1C F6 1A C6 D8 11 F3 25 1C F6 1A C6 D8 11 F3   ÈöÆØó%öÆØó
9D A0 27 37 87 C1 F6 02 9D A0 27 37 87 C1 F6 02    '7‡Áö '7‡Áö
CB 72 1B D4 02 AE B8 14 CB 72 1B D4 02 AE 44 E4   ËrÔ®¸ËrÔ®Dä



Image

First 3 Sectors are linked to attachment

it looks like encrypted data, but sure it not encrypted from DSLR , please give solution for this

Attachments:
first 3 sectors.zip [1.35 KiB]
Downloaded 539 times
Author:  einstein9 [ February 28th, 2019, 2:44 ]
Post subject:  Re: un identified data from failure CF CARD
it looks like encrypted data, but sure it not encrypted from DSLR , please give solution for this[/quote]

Not Encrypted, Controller problem
Author:  Dananjaya [ February 28th, 2019, 3:41 ]
Post subject:  Re: un identified data from failure CF CARD
how many total sectors shown?
Author:  applpp22 [ February 28th, 2019, 7:00 ]
Post subject:  Re: un identified data from failure CF CARD
Quote:
Not Encrypted, Controller problem

is it work if i suppose to change Controller ic , or need to read with nand flash readers??

Quote:
how many total sectors shown?

totel 60Gb( 97.6% ) imaged .. with DE ( It's 64GB CF Card )
Author:  lcoughey [ February 28th, 2019, 8:20 ]
Post subject:  Re: un identified data from failure CF CARD
I've seen this where the controller just throws out garbage and chip off is needed. Usually this is with Lexar.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/