Page 1 of 1
SSD Intel NVME id's fine in DDI but wrong lba shown
Posted: August 15th, 2019, 12:09
by nicoalbrecht
I got an intel here 360GB nvme SSD drive that id's in DDI4 only as a 2GB drive. Is there currently any solution for that problem.
link for pictures of the controller chip.
https://photos.app.goo.gl/gHvRHSLwtyDbj99n8It seems to image the small area just fine. Any input or idea what's going on here.
Re: SSD Intel NVME id's fine in DDI but wrong lba shown
Posted: August 15th, 2019, 13:19
by lcoughey
It doesn't ID fine.
Re: SSD Intel NVME id's fine in DDI but wrong lba shown
Posted: August 15th, 2019, 13:29
by nicoalbrecht
Yeah, serial is off a bit too. Doesn't match either.
Re: SSD Intel NVME id's fine in DDI but wrong lba shown
Posted: August 15th, 2019, 14:03
by lcoughey
If it doesn't read with DDI PCIe add-on, I believe you are out of options...which is very scary for the future of data recovery.
Re: SSD Intel NVME id's fine in DDI but wrong lba shown
Posted: August 16th, 2019, 6:21
by nicoalbrecht
To the best of my knowledge nobody can deal with your NVMe drive. Usually they ID with small capacity when their translator is shot, and there are no tools to deal with that (and quite likely never will be). Was worth a try to post here.
Re: SSD Intel NVME id's fine in DDI but wrong lba shown
Posted: August 16th, 2019, 12:07
by Amarbir[CDR-Labs]
lcoughey wrote:If it doesn't read with DDI PCIe add-on, I believe you are out of options...which is very scary for the future of data recovery.
Luke ,
Do Yo Have The Knowledge any developments in NVMe Across all tools spectrum
Re: SSD Intel NVME id's fine in DDI but wrong lba shown
Posted: August 16th, 2019, 14:02
by lcoughey
Amarbir[CDR-Labs] wrote:Luke ,
Do Yo Have The Knowledge any developments in NVMe Across all tools spectrum
To this point, if anyone is developing anything more than what DDI can handle with their PCIe add-on, they are keeping it very quiet in my circles. Maybe your good friends at Stellar are working on something.