USB 3.0 Connector Pinout

[jeremyb]

I got this drive from another DR company and it has no USB 3.0/3.1 header, does anyone know which pads are for USB 2.0 D+ and D-

Attachments

USB3.0 Monolithic - Pinout.jpg.png (606.9 KiB) Viewed 7559 times

[fzabkar]

Is this a trick question?

https://pinouts.ru/Slots/USB_pinout.shtml

This layout would seem the most logical:

USB3.0_Monolithic-Pinout_2.0_pads.png (619.41 KiB) Viewed 7555 times

[jeremyb]

Is this a trick question?

That was my first guess but it doesn't appear to work

[HaQue]

so drive not working probably.

what are the 5 rectangular traces in the middle? some sort of signal interference mitigation or something?

looks like you may need to find a donor and use the 30 pads up top to find nand pinout. whats the drive?

[jeremyb]

I think something is fubar w/ the controller, the 3.3v rail isn't outputting the proper voltage.. I'll check the passive components tomorrow...

[p_patryk]

I think your pinout is right. Pad with 5V is cut out from two vias on the bottom from it. I guess it is the reason why you can't power up device.

[fzabkar]

I think your pinout is right. Pad with 5V is cut out from two vias on the bottom from it. I guess it is the reason why you can't power up device.

So it was a trick question. :-)

[HaQue]

it is either cut, or there is still some black coating left on there where laser missed.