All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: LITEON CV3-CE512-11 SATA 512GB
PostPosted: December 3rd, 2019, 7:03 
Offline

Joined: May 9th, 2017, 11:33
Posts: 56
Hi there,

I have this LITEON CV3-CE512-11 SATA 512GB SSD with MARVELL 88SS1074-BSW2 controller.

First try: Drive came ready. I can Read ID. If i try to read sector result in BSY.

After lots of trials pwr on and off it started to work normally. I even copied 25GB of data with good speed of 65-70mb/s.

After a bad sector it get's back to square 1. Any sector i try result in BSY.

Aceab told me it is totally unsuported at firmware level.

So I tried In-circuit recovery of SSDs with "weak" NAND like described here http://www.hddoracle.com/viewtopic.php?f=106&t=2740

I noticed that around 2.425 - 2.450V it started to read, so i was very happy.

Not for long, because all read sectors are 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 DDDDDDDDDDDDDDDD.

I was using PC 3000 Flash as power supply and i thought it's not delivering enough amps (max 500mA).

But connected to a lab power supply it seems like it's only draining 70mA.

Any ideeas how to move further? Some new tricks maybe?

Thanks all.


Attachments:
_MG_5748.jpg
_MG_5748.jpg [ 8.45 MiB | Viewed 1273 times ]
_MG_5747.jpg
_MG_5747.jpg [ 8.78 MiB | Viewed 1273 times ]
Top
 Profile  
 
 Post subject: Re: LITEON CV3-CE512-11 SATA 512GB
PostPosted: December 4th, 2019, 7:35 
Offline

Joined: May 9th, 2017, 11:33
Posts: 56
Thanks all. Fully recovered.


Top
 Profile  
 
 Post subject: Re: LITEON CV3-CE512-11 SATA 512GB
PostPosted: December 4th, 2019, 13:47 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7581
Location: UK
MasterT wrote:
Thanks all. Fully recovered.


And the solution was? :-)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: LITEON CV3-CE512-11 SATA 512GB
PostPosted: January 7th, 2020, 12:16 
Offline

Joined: May 9th, 2017, 11:33
Posts: 56
Controller reballing and memory chips voltage variation.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group