View topic - Modifying firmware on HP SSD M700 using MPTool?

Main » Forums home » Flash storage, SSD

All times are UTC - 5 hours [ DST ]

Switch to mobile style

Modifying firmware on HP SSD M700 using MPTool?

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

2014beta

Post subject: Modifying firmware on HP SSD M700 using MPTool?

Posted: January 14th, 2020, 15:21

Joined: February 2nd, 2018, 19:09
Posts: 6

Here is what I am working with:

Code:

SMI 224x / 225x SSD Flash ID ATA reader v0.556a by Ochkin Vadim 
OS: 10.0 build 10240 
Drive: 1 (ATA) 
Model: HP SSD M700 120GB                        
Fw: Q1107A1 
Size: 114473 MB 
From smart: [SMI2258XT] [Q1107A1 00] 
Controller : SM2258   
FlashID: 0xec, 0x3a, 0x94,0x43,0xa4,0xca, 0x0,0x0 - Samsung 14nm MLC 16k 128Gb / CE 128Gb / die 
Channel: 2 
CE: 4 
TotDie: 8 
Plane: 2 
Die / Ce: 1 
Ch map: 0x03 
CE map: 0x0F 
Inter. : 4 
First Fblock: 2 
Total Fblock: 1763 
Total Hblock: 1789 
Fblock Per Ce: 1763 
Fblock Per Die: 1763 
Original Spare Block Count: 129
Vendor Marked Bad Block: 0 
Bad Block From Pretest: 18

Looking to dump the firmware, modify the serial number and/or model number, and reflash.

Tried several versions of MPTool that I found online but this was as far as I had gotten (see pics). Any help greatly appreciated. Thank you.

Top

HaQue

Post subject: Re: Modifying firmware on HP SSD M700 using MPTool?

Posted: January 15th, 2020, 6:36

Joined: December 4th, 2012, 1:35
Posts: 3779
Location: Adelaide, Australia

As far a I know MP tools don't dump firmware, just writes it

Top

2014beta

Post subject: Re: Modifying firmware on HP SSD M700 using MPTool?

Posted: January 15th, 2020, 7:20

Joined: February 2nd, 2018, 19:09
Posts: 6

Any suggestions then?

Top

HaQue

Post subject: Re: Modifying firmware on HP SSD M700 using MPTool?

Posted: January 17th, 2020, 11:22

Joined: December 4th, 2012, 1:35
Posts: 3779
Location: Adelaide, Australia

Cavaet is that I haven't used MP Tool for anything serious as 1) I don't trust them(myself with them?) and there is no real documentation worth its salt to be 100% confident that I wouldn't kill the drive.

I don't know if there might be a different password/passcode for the MP Tools that will allow editing the serial or not, I think some SMI or Phison have different user level codes.

There might be other things you need to do for the tools such as drivers or some factories have hardware that is a requirement of the tools working properly. Not even sure if serial is available to change in MP Tools, but I think so.

For the picture that has the flash error, this might be just you need to find the right version of MP Tool that has your flash in the config/database file... such as a later version

Top

Page 1 of 1

[ 4 posts ]

Main » Forums home » Flash storage, SSD

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum