HDD GURU FORUMS
http://forum.hddguru.com/

Help with 4GB pendrive with SC708T controller
http://forum.hddguru.com/viewtopic.php?f=10&t=40225
Page 1 of 1

Author:  rd-simone [ July 31st, 2020, 9:18 ]
Post subject:  Help with 4GB pendrive with SC708T controller

Hello,

I have here a pendrive 4GB with SC708T controller and chip ID MT29F32G08CBABAWP.

Is there anyone that can give me remote assistance to solve it with PC3000 Flash (for a fee)?

Thanks
Simone

Author:  Amarbir[CDR-Labs] [ July 31st, 2020, 10:47 ]
Post subject:  Re: Help with 4GB pendrive with SC708T controller

Hi,
Do You Mind Dumping The Dump On Google Drive And Letting Me Work On It By Downloading It ,Might Be I Can Give You a Damn Good Rate

PS : I Will Do This In VNR

Author:  rd-simone [ July 31st, 2020, 12:36 ]
Post subject:  Re: Help with 4GB pendrive with SC708T controller

Thanks Amarbir,

you have PM!

Author:  arvika [ July 31st, 2020, 15:17 ]
Post subject:  Re: Help with 4GB pendrive with SC708T controller

I can help if still need, but need upload dump to our FTP.

Author:  arvika [ August 5th, 2020, 17:33 ]
Post subject:  Re: Help with 4GB pendrive with SC708T controller

Case was solved.

Author:  Amarbir[CDR-Labs] [ August 6th, 2020, 14:29 ]
Post subject:  Re: Help with 4GB pendrive with SC708T controller

rd-simone wrote:
Thanks Amarbir,

you have PM!


Hello,
Sorry Ben Busy And i did See Your PM To Me ,Kindly upload it to Google drive and gimme access ,I would also love to try it out for you even if its solved by michael

Author:  Amarbir[CDR-Labs] [ August 23rd, 2020, 6:44 ]
Post subject:  Re: Help with 4GB pendrive with SC708T controller

Bumping thread ,
Would you like to share so that i can also try

Author:  arvika [ August 23rd, 2020, 15:41 ]
Post subject:  Re: Help with 4GB pendrive with SC708T controller

It was custom solution. Few tools was use for solve this case.

Author:  Amarbir[CDR-Labs] [ August 25th, 2020, 14:25 ]
Post subject:  Re: Help with 4GB pendrive with SC708T controller

arvika wrote:
It was custom solution. Few tools was use for solve this case.


Wow ,
That would be even more exciting to work with then

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/