Page 1 of 1

Toshiba KBG30ZMV256G M2 NVMe PCIe SSD - FW ADHA0101

Posted: March 12th, 2021, 22:45
by neuron
Hi,

Note: I have Oscilloscopes and DMM Analogue and Digital test the M2 NVMe

We can't detect the Disk.

Schematic for this M2?

I have technical:
- M.2 PCIE Connector Pinouts
- PCI Register
- COMMAND TABLE - ADMIN Command set
- NVM Command Set


Tests ...?

Best Regards,
Ruy

Re: Toshiba KBG30ZMV256G M2 NVMe PCIe SSD - FW ADHA0101

Posted: March 13th, 2021, 22:26
by neuron
The two big grey square are Diodes?
DIODE mode - right near the mem cells - label 0,0 V ... 0,XX Ohm.
DIODE mode - The other near the edge is ok - 0,5 V.

Its the diode or other comp. surround?

Best Regards,
Ruy