All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Kingston SSDNow200 Safe Mode
PostPosted: August 25th, 2015, 3:52 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1757
Hi,

Does anyone has some info on to set a Kinston SSDNow200 with PCB 2024460-901.A00G into Safe Mode?

Here is a picture of the PCB.
https://www.dropbox.com/s/ef8m8mw7253qg ... 6.jpg?dl=0

Thanks


Top
 Profile  
 
 Post subject: Re: Kingston SSDNow200 Safe Mode
PostPosted: September 12th, 2015, 23:49 
Offline

Joined: September 12th, 2015, 23:46
Posts: 2
Location: Moscow
short it.
you have jmf668 mptool?


Attachments:
king_v200_factory.jpg
king_v200_factory.jpg [ 92.72 KiB | Viewed 6151 times ]
Top
 Profile  
 
 Post subject: Re: Kingston SSDNow200 Safe Mode
PostPosted: April 28th, 2021, 16:44 
Offline

Joined: April 28th, 2021, 16:08
Posts: 1
Location: Moscow
vlo wrote:
short it.
you have jmf668 mptool?

Hello VLO
Can you help me with same ssd. (Kingston sv200s37a/128g)
MB: 2024460-901.A00G
chip: Toshiba TC58NCF668GDT-BB
mem chips: Toshiba GJ7250 TH58NVG7D2HTA20

Now status name: Generic FCR SATA Loader Loader Device (0.0Gb)
Current firmware:01.01001

I try flash kingston update firmware E120506a https://www.kingston.com/us/support/technical/downloads?product=SV200S3&filename=SV200S3_64G_128G_e120506a , but have Error

Code:
Get Erase Count.....FAIL! Error Code = 0xC0
Get Smart Info.....Get Smart Info Fail! Error Code = P10


I unzip this firmware
Code:
ea8eb70635b5780f699424425a6a4445 *Flash.ini
1a4895770cc707910bd125747b1b598f *GDP.bin
58f1e98418f6b72ab3d815a1fa1353f3 *GDP.ini
7295efd319d1a011d806e6c788c2d255 *GDP_OLD.bin
59ab60e10e9a157f083c503b21c16eda *ISP.dat
de1029e9763108fe7dec2f697a7c63e5 *ISP.ini
7b4c778a6b4a9634f9326ffc3fa2cc58 *SYS_LHHA.bin
2d09d5406612e6eb6b6210d68e2a48db *SYS_LHHB.bin
c9c2bcf5791caf078ed068eb35c8beb2 *JMISP66X.exe
1396649dc8e993d8be8d1e9299f46fad *FDCONFIG.SYS
c4c764a349bb9c44729fd1cb26c52394 *AUTOEXEC.BAT
a2e8ed0ca8bcc504c82f505b86cb5845 *README.TXT
f730339b0a5f461b530d93bd57050dff *COMMAND.COM
18d296f40f06c8a26eda606c0031f677 *KERNEL.SYS
9368121bd96b0cb56de374ec54361ff5 *NANSI.SYS


I download JMicron 668 M.P. Tool A.2.0.13 [SVN239] (JMF668) https://www.usbdev.ru/files/jmicron/jmf668mpt/
and this util not see ssd (but i not short pin in your picture)

I don't undestand when short it and move resistor or just short when connect power or short solder with a soldering iron
And i dont understand config JMicron 668 M.P. Tool A.2.0.13

Заранее спасибо.
Code:
http://t.me/maxjumper
o0o-o0o@narod.ru


Attachments:
IMG_20210428_194752.jpg
IMG_20210428_194752.jpg [ 249.5 KiB | Viewed 3031 times ]
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group