HP 64GB flash drive with the FirstChip Controller.

[hack3rcon]

Hello,
I have an HP 64GB flash drive with below details:

Code:

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA

USB Device ID: VID = FFFF PID = 1201

Device Revision: 0000

Manufacturer: NAND
Product Model: USB2DISK
Product Revision: 0.00

Controller Vendor: FirstChip
Controller Part-Number: FC1179
Flash ID code:      AD3A14030850 - Hynix - 1CE/Single Channel [MLC] -> Total Capacity = 16GB

Tools on web:       http://dl.mydigit.net/search/?type=all&q=FC1179


I visited https://www.usbdev.ru/files/firstchip/fc1179mptools/ and tested some of the MpTools programs, but they couldn't fix my drive!
Any idea to fix my flash drive?

Thank you.

[Arch Stanton]

could not fix, did not work, got an error are all useless problem descriptions.

[jeremyb]

I have an HP 64GB flash drive with below details:
Flash ID code: AD3A14030850 - Hynix - 1CE/Single Channel [MLC] -> Total Capacity = 16GB

I think this is your first problem, 64GB UFD with 16GB of NAND.. Likely fake.

[hack3rcon]

could not fix, did not work, got an error are all useless problem descriptions.

I tested some tools and attached some photos:

Attachments

[hack3rcon]

I have an HP 64GB flash drive with below details:
Flash ID code: AD3A14030850 - Hynix - 1CE/Single Channel [MLC] -> Total Capacity = 16GB

I think this is your first problem, 64GB UFD with 16GB of NAND.. Likely fake.

You right. How can I fix it?

[Arch Stanton]

Add 48 GB worth NAND?

[hack3rcon]

Add 48 GB worth NAND?

Thanks.
I just want to format it.

[Arch Stanton]

Have you considered it may be too kaput? And that even when you 'fix' it, it may be as good as useless?

[HaQue]

crush that drive, and as you bring the hammer down, you must say "TAKE THAT YOU FAKE PIECE OF CRAP!"