CompactFlash, SD, MMC, USB flash storage. Anything that does not have moving parts inside.
January 11th, 2022, 16:09
Hello all -
Wondering if anyone can lend some advice.
We've received a SMSR150S3/128G (bare drive). A bit of research on this forum as some others shows it's a RAID 0 device 64GB x2 configuration w/128sector stripe.
Drive presents w/normal V and Amp draw. Thermal camera shows nothing crazy weird.
However SATA Channel 0 is in BSY state.
Thanks to the contributions of others I was able to build an adapter and confirm the second SATA channel is also in a BSY state.
Taking into account that with a loader I read back corrupted data and then assembling into a R0 I cannot seen to find the pins to trigger safe mode on this device.
Anyone have any idea's?
January 11th, 2022, 16:59
IC UU6 near one of the E3 coils appears to be chipped. What voltages do you measure at all three coils?
January 11th, 2022, 17:35
I will take measurements and get back to you.
Here is a better pic of the coils:
January 11th, 2022, 17:39
Chip is okay - just some sticker residue.
Good catch.
January 12th, 2022, 5:31
Safe mode
- Attachments
-
January 12th, 2022, 14:36
Thanks all -
Virtual translator on second channel created and we're pulling off data at 3MB/sec.
January 16th, 2022, 18:55
Just an update 100% recovery - albeit very slow readout.
Powered by phpBB © phpBB Group.