All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 32 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Crucial MX300 - No SATA connection
PostPosted: March 21st, 2022, 11:25 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 107
Location: Austria
Yep - Vcc from MSP is connected to Out of NL


Top
 Profile  
 
 Post subject: Re: Crucial MX300 - No SATA connection
PostPosted: March 21st, 2022, 11:50 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 107
Location: Austria
Changed MSP430 - and what should i say - i'm IN ;)

Thx for everything


Top
 Profile  
 
 Post subject: Re: Crucial MX300 - No SATA connection
PostPosted: March 21st, 2022, 12:04 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15461
Location: Australia
outbreak198x wrote:
in any case, NL is not dead :D - working on donorpcb

it's not easy to find out, because both sides...

i think i know where the 1,8V came from

Attachment:
resistor.png


maybe this should be just a 0-Ohm Resistor? should i try to short it :D - i'm so shy

No, don't short it yet. You still haven't told us where the diode is connected. Is there a marking code on it? Where is the 4.4V coming from?

Measure the resistance of the resistor on your patient and donor.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Crucial MX300 - No SATA connection
PostPosted: March 21st, 2022, 12:18 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 107
Location: Austria
fzabkar wrote:
outbreak198x wrote:
in any case, NL is not dead :D - working on donorpcb

it's not easy to find out, because both sides...

i think i know where the 1,8V came from

Attachment:
resistor.png


maybe this should be just a 0-Ohm Resistor? should i try to short it :D - i'm so shy

No, don't short it yet. You still haven't told us where the diode is connected. Is there a marking code on it? Where is the 4.4V coming from?

Measure the resistance of the resistor on your patient and donor.


Finally it already works :)
but i can check when cloned if you want ;)


Top
 Profile  
 
 Post subject: Re: Crucial MX300 - No SATA connection
PostPosted: March 21st, 2022, 12:19 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15461
Location: Australia
outbreak198x wrote:
Changed MSP430 - and what should i say - i'm IN ;)

That must mean that the "NL" LDO must getting its power from 5Vin rather than 5Vout. I wonder if the heating that you sensed was actually coming from the resistor rather than the diode. On another Crucial SSD there was a 10 ohm resistor in series with the supply to the MSP430.

Here is another soft start thread:

https://forum.hddguru.com/viewtopic.php?f=10&t=33908&p=269986#p269986

_________________
A backup a day keeps DR away.


Last edited by fzabkar on March 21st, 2022, 12:28, edited 2 times in total.

Top
 Profile  
 
 Post subject: Re: Crucial MX300 - No SATA connection
PostPosted: March 21st, 2022, 12:21 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 107
Location: Austria
fzabkar wrote:
outbreak198x wrote:
Changed MSP430 - and what should i say - i'm IN ;)

That must mean that the "NL" LDO must getting its power from 5Vin rather than 5Vout. I wonder if the heating that you sensed was actually coming from the resistor rather than the diode. On another Crucial SSD, there was a 10 ohm resistor in series with the supply to the MSP430.


it's a 10 Ohm restistor, and yes, i think that's what was hot - but my FLIR cam is on the way, so in future, i can send you thermal pics ;)


Top
 Profile  
 
 Post subject: Re: Crucial MX300 - No SATA connection
PostPosted: March 21st, 2022, 15:23 
Offline

Joined: February 18th, 2020, 9:35
Posts: 36
Location: Ukraina
Read the ROM on the programmer and put it here, there may be problems with it.


Top
 Profile  
 
 Post subject: Re: Crucial MX300 - No SATA connection
PostPosted: March 22nd, 2022, 4:45 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 107
Location: Austria
gold6565 wrote:
Read the ROM on the programmer and put it here, there may be problems with it.


no - i already changed ROM before ;)

but as written, Problem is solved by changing MSP Chip


Top
 Profile  
 
 Post subject: Re: Crucial MX300 - No SATA connection
PostPosted: March 22nd, 2022, 7:12 
Offline

Joined: February 18th, 2020, 9:35
Posts: 36
Location: Ukraina
The ROM is unique, for each SSD, it cannot be changed, and it has a block that is responsible for the MSP


Top
 Profile  
 
 Post subject: Re: Crucial MX300 - No SATA connection
PostPosted: March 22nd, 2022, 7:15 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 107
Location: Austria
gold6565 wrote:
The ROM is unique, for each SSD, it cannot be changed, and it has a block that is responsible for the MSP

i know that it is unique, it was just a Test to find out if the ROM Chip was faulty.

but as told - i already have all the data


Top
 Profile  
 
 Post subject: Re: Crucial MX300 - No SATA connection
PostPosted: March 22nd, 2022, 8:33 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 107
Location: Austria
FLIR arrived :D

have to play around with it, but first images shows me, that i'm not that bad at guessing temperatures :D

Attachment:
IMG_5716.JPG
IMG_5716.JPG [ 1.1 MiB | Viewed 6089 times ]


Top
 Profile  
 
 Post subject: Re: Crucial MX300 - No SATA connection
PostPosted: March 22nd, 2022, 8:51 
Offline

Joined: November 7th, 2020, 5:31
Posts: 1084
Location: The_UK
Not sure what your calibration is like, but flip the pcb over and check it again.

_________________
Data Recovery Services in the UK.
https://www.usbrecovery.co.uk/


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 32 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 40 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group