HDD GURU FORUMS

Hello,

I have this chip desoldered from a crappy chinese phone from 2015.

Can data be accessed running wires to an SD adapter like the previous eMMC from Android phones?

Allsocket makes a Adapter for these. It is a pretty common EMMC
BGA 162/186

https://www.amazon.com/ALLSOCKET-eMCP16 ... RydWU&th=1

Cleanroom wrote:Allsocket makes a Adapter for these. It is a pretty common EMMC
BGA 162/186

https://www.amazon.com/ALLSOCKET-eMCP16 ... RydWU&th=1

Thanks, I saw that yesterday.
But it takes more than a month to arrive where I am.
I wanted to retrieve this as fast as possible. I am not really sure about the pinout.
I remember doing a eMMC a couple of years ago with a micro SD card adapter, and it worked. But not quite sure how to pin this one out to the adapter pins:

Cleanroom wrote:Allsocket makes a Adapter for these. It is a pretty common EMMC
BGA 162/186

https://www.amazon.com/ALLSOCKET-eMCP16 ... RydWU&th=1

Hey ,
Lots of Chinese Guys Sell That All in One Adapter ,Change the inner sections and the adapter is ready for another emmc ,My Experience is with NAND from Pendrives , SD Cards And Micro SD Cards ,CF Cards ,I am not into mobile phone stuff ,But i am sure its just a matter of interfacing SD interface to emmc / Emcp using just 1 data channel or more if you need speed

Amarbir[CDR-Labs] wrote:

Cleanroom wrote:Allsocket makes a Adapter for these. It is a pretty common EMMC
BGA 162/186

https://www.amazon.com/ALLSOCKET-eMCP16 ... RydWU&th=1

Hey ,
Lots of Chinese Guys Sell That All in One Adapter ,Change the inner sections and the adapter is ready for another emmc ,My Experience is with NAND from Pendrives , SD Cards And Micro SD Cards ,CF Cards ,I am not into mobile phone stuff ,But i am sure its just a matter of interfacing SD interface to emmc / Emcp using just 1 data channel or more if you need speed

Hi Amarbir!!

Sorry I did not see your reply.
Thank you very much for your input. I just grabbed one of these. Will let you know the outcome.

Regards

Hi everyone,

Just wanted to say the adapter arrived today and everything has been recovered.

Thank you all for your input in the matter

Do you have a link for the adapter?

grevan wrote:Do you have a link for the adapter?

This one:

ALLSOCKET BGA162/BGA186-SD Adapter eMCP162-186 Reading/Writing Socket FBGA162/186 Programming for Skhynix Micron Samsung Memory USER PARTITION Data for KMK2U000VM-B604 https://amzn.eu/d/9OHcAGO