HDD GURU FORUMS

Hello,
I Have a case with WD 480GB SSD Green M.2 Interface With Sandisk 20-82-00469-2 Controller .My Google Search Tells me this controller does not encrypt the Data in NAND and a chipoff should be supported in My Tools PC3K Flash and VNR " .I also see that its supported in Softcenter FE which i do not have .Does PC3K SSD Tool Support this SSD and Its Controller .I am attaching some images for everyone reference .

PS : I still have to check the behavior of this SSD ,Just received It yesterday

SSD Picture



Controller Picture

FE and VNR support it. PC3K probably not at current day.

Amarbir[CDR-Labs] wrote: I Have a case with WD 480GB SSD Green M.2 Interface With Sandisk 20-82-00469-2 Controller ... Does PC3K SSD Tool Support this SSD and Its Controller .I am attaching some images for everyone reference .

No support under pc3k SSD not sure about pc3k flash though.

There's a list of currently supported devices on Aces website https://blog.acelab.eu.com/pc-3000-ssd- ... dated.html

arvika wrote:FE and VNR support it. PC3K probably not at current day.

Thanks Arvika,
.thanks a tonn again

Lardman wrote:

Amarbir[CDR-Labs] wrote: I Have a case with WD 480GB SSD Green M.2 Interface With Sandisk 20-82-00469-2 Controller ... Does PC3K SSD Tool Support this SSD and Its Controller .I am attaching some images for everyone reference .

No support under pc3k SSD not sure about pc3k flash though.

There's a list of currently supported devices on Aces website https://blog.acelab.eu.com/pc-3000-ssd- ... dated.html

Thanks Lardman ,
I have a thread going on here also - > https://forum.acelab.eu.com/viewtopic.php?f=179&t=10916