| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Patriot Pyro - Sandforce SF-2281 - Busy http://forum.hddguru.com/viewtopic.php?f=10&t=42943 |
Page 1 of 1 |
| Author: | suricate.ch [ December 17th, 2022, 5:18 ] |
| Post subject: | Patriot Pyro - Sandforce SF-2281 - Busy |
Hi, I got this SSD PP240GS25SSDR, it has a Sandforce contrller SF-2281. Drive gets ready but busy when reading ID. I've tried cold ans hot... doesn't help. Is there anything else to try ? Thanks Claude |
|
| Author: | Lardman [ December 17th, 2022, 5:29 ] |
| Post subject: | Re: Patriot Pyro - Sandforce SF-2281 - Busy |
Other than trying to pull it in and out of safe mode there probably nothing else, Sandforce controller recovery is still commercially sensitive and you'll probably have to sub that one out to a lab who have the capabilities. |
|
| Author: | digisupport [ December 17th, 2022, 8:10 ] |
| Post subject: | Re: Patriot Pyro - Sandforce SF-2281 - Busy |
Only suggestion is to ask Northwind if they can handle this model.. https://forum.hddguru.com/memberlist.ph ... ile&u=9788 |
|
| Author: | fzabkar [ December 17th, 2022, 13:21 ] |
| Post subject: | Re: Patriot Pyro - Sandforce SF-2281 - Busy |
suricate.ch wrote: Drive gets ready but busy when reading ID. I've tried cold ans hot... doesn't help. Is there anything else to try ? Vary the NAND Vcc? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|