| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| SSD Kingston 480Gb SM2258XT Can't create virtual translator http://forum.hddguru.com/viewtopic.php?f=10&t=43209 |
Page 1 of 1 |
| Author: | parmindo [ March 21st, 2023, 11:12 ] |
| Post subject: | SSD Kingston 480Gb SM2258XT Can't create virtual translator |
Hello guys, good day. I'm looking for improvement on my SSD knowledge. I'm here with one that is not a customer case, I'm only studying. I have a MRT with SSD function. This SSD recognizes as 14.92Gb when JP1 is short. This is what I get in MRT: Selected family : ............................: Silicon Power A55 Master Controller model : ....................: SM2258XT Chip id : ....................................: 0xAD5E2933A0 Vendor : .....................................: Hynix SSD state: Wether it is in a ready state : ..............: Yes Firmware working mode : ......................: ROM SSD error code : .............................: 0x00(No error) Whether SSD is locked : .....................: No Whether in safe mode : .......................: Yes Whether access user area : ...................: No Whether access SA : .........................: No Load loader... Read Loader : ................................: success Loader name : ................................: MPISP_L06_B0KB_S0104D Write to Loader : ............................: success Execute Loader code : ........................: success SSD state: Wether it is in a ready state : ..............: Yes Firmware working mode : ......................: LDR SSD error code : .............................: 0x00(No error) Whether SSD is locked : .....................: No Whether in safe mode : .......................: No Whether access user area : ...................: No Whether access SA : .........................: Yes Load loader : ................................: success Basic SSD information: Read chip information : ......................: success Chip id : ....................................: 0xAD5E2933A0 Vendor : .....................................: Hynix Flash type : .................................: 3d-96L TLC 16k Chip capacity : ..............................: 4096 Mb channel number : .............................: 1 Chip number per channel : ....................: 4 Chip layers : ................................: 2 Number of logical units : ....................: 1 Number of chip storage blocks : ..............: 0x1000 Number of pages per storage block : ..........: 0x80 Page size : ..................................: 0x2000 Maximum retry level : ........................: 0x0 Load relocation block table : ................: Fail Load CP list...... Load CP list... : ............................: success Read password information... Read password information : ..................: Fail Create Virtual Translator... Create Virtual Translator : ..................: Fail ---End--- I've tried 3 Loaders that MRT offers to this controller, same results on each. Had others with this controller that I've managed to recover using the same tool, don't know why this one isn't working. Thank you for any help. |
|
| Author: | fzabkar [ March 21st, 2023, 12:16 ] |
| Post subject: | Re: SSD Kingston 480Gb SM2258XT Can't create virtual transla |
DIY recovery from busy SM2258XT SSD: http://www.hddoracle.com/viewtopic.php?f=106&t=3238 |
|
| Author: | parmindo [ March 21st, 2023, 16:37 ] |
| Post subject: | Re: SSD Kingston 480Gb SM2258XT Can't create virtual transla |
fzabkar, wow, thank you so much for this compilation. I've found this EazyTools some time ago, completely forgot about that. Now I believe it will be possible. Thank you. |
|
| Author: | parmindo [ April 26th, 2023, 17:57 ] |
| Post subject: | Re: SSD Kingston 480Gb SM2258XT Can't create virtual transla |
fzabkar, Do you have any idea of what MPtool I need to use on this one? Model: SM2258AB-20-00204000 Fw : 20141211 Size : 0 MB [0.0 GB] Controller : SM2258AA in ROM Mode Bank00: 0xad,0x5e,0x29,0x33,0x0,0xa0,0x0,0x0 - Hynix 3dv5-96L TLC 16k 1024Gb/CE 512Gb/die Bank01: 0xad,0x5e,0x29,0x33,0x0,0xa0,0x0,0x0 - Hynix 3dv5-96L TLC 16k 1024Gb/CE 512Gb/die Bank02: 0xff,0xff,0xff,0xff,0xff,0xff,0x0,0x0 - Bank03: 0xff,0xff,0xff,0xff,0xff,0xff,0x0,0x0 - Bank04: 0xff,0xff,0xff,0xff,0xff,0xff,0x0,0x0 - Bank05: 0xff,0xff,0xff,0xff,0xff,0xff,0x0,0x0 - Bank06: 0xff,0xff,0xff,0xff,0xff,0xff,0x0,0x0 - Bank07: 0xff,0xff,0xff,0xff,0xff,0xff,0x0,0x0 - Bank08: 0xad,0x5e,0x29,0x33,0x0,0xa0,0x0,0x0 - Hynix 3dv5-96L TLC 16k 1024Gb/CE 512Gb/die Bank09: 0xad,0x5e,0x29,0x33,0x0,0xa0,0x0,0x0 - Hynix 3dv5-96L TLC 16k 1024Gb/CE 512Gb/die Don't know if this SM2258AA is supported by EasyTools at all. I did solve the previous case, but now I'm struggling with this one (kingston 480Gb Sata SSD too) |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|