All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: SSD Kingston 480Gb SM2258XT Can't create virtual translator
PostPosted: March 21st, 2023, 11:12 
Offline
User avatar

Joined: October 20th, 2017, 9:14
Posts: 124
Location: Brazil
Hello guys, good day.
I'm looking for improvement on my SSD knowledge. I'm here with one that is not a customer case, I'm only studying.
I have a MRT with SSD function.
This SSD recognizes as 14.92Gb when JP1 is short.
This is what I get in MRT:
Selected family : ............................: Silicon Power A55
Master Controller model : ....................: SM2258XT
Chip id : ....................................: 0xAD5E2933A0
Vendor : .....................................: Hynix

SSD state:
Wether it is in a ready state : ..............: Yes
Firmware working mode : ......................: ROM
SSD error code : .............................: 0x00(No error)
Whether SSD is locked : .....................: No
Whether in safe mode : .......................: Yes
Whether access user area : ...................: No
Whether access SA : .........................: No

Load loader...
Read Loader : ................................: success
Loader name : ................................: MPISP_L06_B0KB_S0104D
Write to Loader : ............................: success
Execute Loader code : ........................: success

SSD state:
Wether it is in a ready state : ..............: Yes
Firmware working mode : ......................: LDR
SSD error code : .............................: 0x00(No error)
Whether SSD is locked : .....................: No
Whether in safe mode : .......................: No
Whether access user area : ...................: No
Whether access SA : .........................: Yes
Load loader : ................................: success

Basic SSD information:
Read chip information : ......................: success
Chip id : ....................................: 0xAD5E2933A0
Vendor : .....................................: Hynix
Flash type : .................................: 3d-96L TLC 16k
Chip capacity : ..............................: 4096 Mb
channel number : .............................: 1
Chip number per channel : ....................: 4
Chip layers : ................................: 2
Number of logical units : ....................: 1
Number of chip storage blocks : ..............: 0x1000
Number of pages per storage block : ..........: 0x80
Page size : ..................................: 0x2000
Maximum retry level : ........................: 0x0

Load relocation block table : ................: Fail


Load CP list......


Load CP list... : ............................: success

Read password information...
Read password information : ..................: Fail

Create Virtual Translator...
Create Virtual Translator : ..................: Fail
---End---


I've tried 3 Loaders that MRT offers to this controller, same results on each. Had others with this controller that I've managed to recover using the same tool, don't know why this one isn't working.
Thank you for any help.


Top
 Profile  
 
 Post subject: Re: SSD Kingston 480Gb SM2258XT Can't create virtual transla
PostPosted: March 21st, 2023, 12:16 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15461
Location: Australia
DIY recovery from busy SM2258XT SSD:
http://www.hddoracle.com/viewtopic.php?f=106&t=3238

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: SSD Kingston 480Gb SM2258XT Can't create virtual transla
PostPosted: March 21st, 2023, 16:37 
Offline
User avatar

Joined: October 20th, 2017, 9:14
Posts: 124
Location: Brazil
fzabkar, wow, thank you so much for this compilation. I've found this EazyTools some time ago, completely forgot about that.
Now I believe it will be possible. Thank you.


Top
 Profile  
 
 Post subject: Re: SSD Kingston 480Gb SM2258XT Can't create virtual transla
PostPosted: April 26th, 2023, 17:57 
Offline
User avatar

Joined: October 20th, 2017, 9:14
Posts: 124
Location: Brazil
fzabkar, Do you have any idea of what MPtool I need to use on this one?

Model: SM2258AB-20-00204000
Fw : 20141211
Size : 0 MB [0.0 GB]
Controller : SM2258AA in ROM Mode
Bank00: 0xad,0x5e,0x29,0x33,0x0,0xa0,0x0,0x0 - Hynix 3dv5-96L TLC 16k 1024Gb/CE 512Gb/die
Bank01: 0xad,0x5e,0x29,0x33,0x0,0xa0,0x0,0x0 - Hynix 3dv5-96L TLC 16k 1024Gb/CE 512Gb/die
Bank02: 0xff,0xff,0xff,0xff,0xff,0xff,0x0,0x0 -
Bank03: 0xff,0xff,0xff,0xff,0xff,0xff,0x0,0x0 -
Bank04: 0xff,0xff,0xff,0xff,0xff,0xff,0x0,0x0 -
Bank05: 0xff,0xff,0xff,0xff,0xff,0xff,0x0,0x0 -
Bank06: 0xff,0xff,0xff,0xff,0xff,0xff,0x0,0x0 -
Bank07: 0xff,0xff,0xff,0xff,0xff,0xff,0x0,0x0 -
Bank08: 0xad,0x5e,0x29,0x33,0x0,0xa0,0x0,0x0 - Hynix 3dv5-96L TLC 16k 1024Gb/CE 512Gb/die
Bank09: 0xad,0x5e,0x29,0x33,0x0,0xa0,0x0,0x0 - Hynix 3dv5-96L TLC 16k 1024Gb/CE 512Gb/die


Don't know if this SM2258AA is supported by EasyTools at all. I did solve the previous case, but now I'm struggling with this one (kingston 480Gb Sata SSD too)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group