HDD GURU FORUMS
http://forum.hddguru.com/

can anyone help please ?
http://forum.hddguru.com/viewtopic.php?f=10&t=43296		 Page 1 of 1
Author:  Core.iStores [ April 27th, 2023, 9:28 ]
Post subject:  can anyone help please ?
i have this SSD M.2 and it shows like this with R-Studio

and when i do scan it seems that there is no data

Attachments:
2.png
2.png [ 6.87 KiB | Viewed 3064 times ]
1.png
1.png [ 2.58 KiB | Viewed 3064 times ]
Author:  fzabkar [ April 27th, 2023, 13:08 ]
Post subject:  Re: can anyone help please ?
Can you show us the boot sectors?
Author:  Core.iStores [ April 27th, 2023, 14:05 ]
Post subject:  Re: can anyone help please ?
fzabkar wrote:
Can you show us the boot sectors?


Attachments:
Controller.jpg
Controller.jpg [ 481.25 KiB | Viewed 3024 times ]
brand.jpg
brand.jpg [ 418.12 KiB | Viewed 3024 times ]
File comment: i did not complete the imaging
imaging.png
imaging.png [ 1.23 KiB | Viewed 3025 times ]
Sector 2048.png
Sector 2048.png [ 46.33 KiB | Viewed 3025 times ]
Sector 0.png
Sector 0.png [ 45.86 KiB | Viewed 3025 times ]
Author:  Core.iStores [ April 27th, 2023, 14:57 ]
Post subject:  Re: can anyone help please ?
what kind of component is this please ?

Attachments:
shorted.jpg
shorted.jpg [ 222.95 KiB | Viewed 3004 times ]
Author:  fzabkar [ April 27th, 2023, 16:44 ]
Post subject:  Re: can anyone help please ?
I suspect that the "shorted" component may be an inductor. It is probably filtering a supply rail, so no problem there.

Did your customer reformat the data partition? If so, then the data would have been subject to TRIM.

The partition table in sector 0 is empty ...
Author:  Core.iStores [ April 27th, 2023, 22:04 ]
Post subject:  Re: can anyone help please ?
fzabkar wrote:
I suspect that the "shorted" component may be an inductor. It is probably filtering a supply rail, so no problem there.

Did your customer reformat the data partition? If so, then the data would have been subject to TRIM.

The partition table in sector 0 is empty ...


no he did not format it. the ssd never showed with him
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/