Hello,
I have a SP flash drive with the following details:
Code:
Description: [G:]USB Mass Storage Device(USB MEMORY BAR)
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 090C PID = 3000
Device Vendor: Silicon Motion,Inc.
Device Name: SM3255AA MEMORY BAR
Device Revision: 0100
Product Model: USB MEMORY BAR
Product Revision: 1000
Controller Vendor: SMI
Controller Part-Number: SM3257ENLTBB - ISP NONE
Flash ID code: AD3A18A3 - Hynix H27UDG8M2M - 2CE/Single Channel [TLC-16K] -> Total Capacity = 32GB
Tools on web: http://dl.mydigit.net/special/up/smi.html
Device Type: Mass Storage Device
Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 100mA
USB Device ID: VID = 090C PID = 3000
Device Vendor: Silicon Motion,Inc.
Device Name: SM3255AA MEMORY BAR
Device Revision: 0100
Product Model: USB MEMORY BAR
Product Revision: 1000
Controller Vendor: SMI
Controller Part-Number: SM3257ENLTBB - ISP NONE
Flash ID code: AD3A18A3 - Hynix H27UDG8M2M - 2CE/Single Channel [TLC-16K] -> Total Capacity = 32GB
Tools on web: http://dl.mydigit.net/special/up/smi.html
I used an SMI tool, but I got an error:
Attachment:
1.PNG [ 27.52 KiB | Viewed 3988 times ]
Attachment:
2.PNG [ 26.78 KiB | Viewed 3988 times ]
Which tool is OK?
Thank you.