| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| update firmware CBM2099E http://forum.hddguru.com/viewtopic.php?f=10&t=43402 |
Page 1 of 1 |
| Author: | xyz [ June 12th, 2023, 6:36 ] |
| Post subject: | update firmware CBM2099E |
Hello lads I need to update the firmware of an external drive, but I can't find the right utility and firmware Can anyone help me? I write below the result of ChipGenius thank you very much Description: [D:]Dispositivo di archiviazione di massa USB(General UDisk) Device Type: Mass Storage Device Protocal Version: USB 2.00 Current Speed: High Speed Max Current: 100mA USB Device ID: VID = 048D PID = 04D2 Device Vendor: General Device Name: UDisk Device Revision: 0100 Manufacturer: General Product Model: UDisk Product Revision: 5.00 Controller Vendor: ChipsBank Controller Part-Number: CBM2099E - [2019-11-11] Flash ID code: AD5E28221090 - Hynix - 1CE/Single Channel [TLC] Possible Flash Part-Number ---------------------------- Unknown Flash ID mapping table ---------------------------- [Channel 0] [Channel 1] AD5E28221090 -------- -------- -------- -------- -------- -------- -------- -------- -------- -------- -------- -------- -------- -------- -------- |
|
| Author: | xyz [ June 22nd, 2023, 10:02 ] |
| Post subject: | Re: update firmware CBM2099E |
Up please |
|
| Author: | NikolayIslentev [ June 22nd, 2023, 11:56 ] |
| Post subject: | Re: update firmware CBM2099E |
Hello. Search for Chipsbank CBM2099 UMPTool on usbdev. One of them should work, but you may need to short testpoints on the flash to get it into factory mode. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|