| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| SanDisk Ultra 64GB MicroSD Pin Layout http://forum.hddguru.com/viewtopic.php?f=10&t=43618 |
Page 1 of 1 |
| Author: | Ihab [ August 30th, 2023, 5:00 ] | |||
| Post subject: | SanDisk Ultra 64GB MicroSD Pin Layout | |||
Hello guys! I have this SD Card and it wont be recognized.. it doesnt have a short. I wanted to work with the PC3K Flash. But the PC3K Flash forum Database dont have the PinLayout for this SD kart... maybe someone have it or can tell me where i can find it? I am rady to buy it. Or does have someone other Ideas i could try? Thank you!
|
||||
| Author: | melvin [ August 30th, 2023, 5:04 ] |
| Post subject: | Re: SanDisk Ultra 64GB MicroSD Pin Layout |
That's a standard 7x3 and must be in PC3000 database. |
|
| Author: | Ihab [ August 30th, 2023, 5:22 ] |
| Post subject: | Re: SanDisk Ultra 64GB MicroSD Pin Layout |
melvin, Thanks for your reply! So every 7x3 like this example are the same? I also have another SanDisk 64GB SD with 7x3 but the PINways are a biit different.. i also found one ont the database but also with other PINways. (sorry, i am new at the monolyth) |
|
| Author: | melvin [ August 30th, 2023, 5:25 ] |
| Post subject: | Re: SanDisk Ultra 64GB MicroSD Pin Layout |
Sandisks 7x3 are all the same. Check VCC/ GND position with multimeter/ tracks. Compare it with pictures in the database. |
|
| Author: | Ihab [ August 30th, 2023, 5:26 ] |
| Post subject: | Re: SanDisk Ultra 64GB MicroSD Pin Layout |
melvin, Thats a very good information. Thank you very much! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|